Executing The Diagnostic Test - Toshiba Satellite U400 Maintenance Manual

3.2

Executing the Diagnostic Test

DOS is required to run the Diagnostics Program. To start the programs follow these steps:
1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics
software to the disk.
2. Insert the boot disk into the computer's floppy disk drive and turn on the computer.
The following screen displays:
TOSHIBA Satellite(Pro) U400 Diagnostics
Version v1.10
[ DIAGNOSTICS MENU ]
01.DIAGNOSTIC TEST
02.RUNNING TEST
03.DMI INFORMATION
04.LOG UTILITIES
05.SYSTEM CONFIGURATION
06.OPTION
99.EXIT
3. To select the Diagnostic Test from the Diagnostics Menu use the arrow keys to set the
highlight bar to 01 and press Enter.
4
Satellite U400 and Satellite Pro U400 Tests and Diagnostics Manual
Test Program for Field.
::Select item
ESC :Escape