Optical Disc Drive Safety Instructions - Toshiba Satellite C40 Series User Manual

❖
In any other environment where the risk of interference to other devices or
services is perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in a
specific organization or environment (e.g. airports), you are encouraged to ask for
authorization to use the Wireless LAN device prior to turning on the equipment.

Optical Disc Drive Safety Instructions

NOTE
Location of the Required Label
(Sample shown below. Location of the label and manufacturing information may
vary.)
Canada – Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003.
Exposure to Radio Frequency Radiation
The radiated output power of the Wireless LAN is far below the FCC radio
frequency exposure limits. Nevertheless, the Wireless LAN shall be used in
such a manner that the potential for human contact during normal operation
is minimized. The antenna(s) used for this transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter.
This section is only applicable if your system has an Optical Disc Drive.
This appliance contains a laser system and is classified as a CLASS 1
LASER PRODUCT. To use this model properly, read the User's Guide
carefully and keep it for your future reference.
Never attempt to disassemble, adjust or repair an optical disc drive. You
could damage the drive. You would also be exposed to laser light or other
safety hazards, resulting in serious injury. Always contact an authorized
Toshiba service provider, if any repair or adjustment is required.
7