Table of Contents
Advertisement
DLP2500
SIRIUS Satellite Operation
Activation
You must activate DLP2500 before you can begin to receive the SIRIUS Satellite Radio
broadcast.
1.
Make sure the DLP2500 is properly connected and that its antenna is oriented to receive
the SIRIUS satellite signal.
2.
Turn on the head unit.
3.
Press the MODE button on the head unit repeatedly until "SIRIUS" appears in the display
to select SIRIUS as the mode of operation.
4.
The display will read "UPDATING" until the DLP2500 channel update is completed.
Note: Don't push any buttons or perform any operation until updating is completed.
Once the SIRIUS channels are received, you will be tuned to SIRIUS Satellite Radio's
Preview Channel (Channel 184), and you will be able to hear audio from this channel.
5.
Find the SIRIUS ID (SID) of your unit. The SID can be found on a sticker on the bottom of
the DLP2500.
6.
Contact SIRIUS on the Internet (https://activate.siriusradio.com), and follow the prompts to
activate your subscription. You can also call SIRIUS toll-free at 1- 888-539-SIRIUS (1-888-
539-7474). You will not be able to tune to any other channels until you activate your
SIRIUS subscription.
Basic Operation
The DLP2500 SIRIUS Satellite Receiver is compatible with any Jensen headunit that is "Sirius
Ready". Consult Jensen or SIRIUS Customer Support for more information about compatibility.
Please consult your Jensen owner's manual for the operation instructions specific to your
Jensen Sirius-ready head unit.
7
DLP2500
Advertisement
Table of Contents
