Table of Contents
Advertisement
DLP2500
Installation
Choosing a Mounting Location
Consider safety and availability when selecting a mounting location for the unit, taking care to
select a flat location that has sufficient clearance above the unit to prevent any damage as well as
allow for ventilation. The following are unacceptable mounting locations:
•
Any location that would interfere with moving parts on the vehicle or hamper driving.
•
Any location where the unit could injure passengers if the car stops suddenly.
•
Any location where the tuner is exposed to moisture, rain or water.
•
Any location where the unit is exposed to extreme heat (sunlight, hot air, etc.)
•
Under the carpet or in any enclosed area lacking proper ventilation.
Installation Tips
•
When drilling holes to mount the receiver, make sure the area behind the unit is free from
moving parts, fuel or break lines, wire harnesses or any other items which may be damaged
by drilling a mounting hole or using the supplied screws.
•
Use only the supplies screws and brackets. Other parts could damage the unit.
•
Before beginning the installation, disconnect the battery's negative (-) terminal.
Mounting the Receiver
Use the supplied screws to fasten the unit to the mounting location.
3
DLP2500
Advertisement
Table of Contents
