Vision Fitness X6200HRT Owner's Manual page 42

TROUBLESHOOTING
Our Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may reveal the
cause.
PROBLEM:
SOLUTION:
SOLUTION:
SOLUTION:
PROBLEM:
SOLUTION:
SOLUTION:
SOLUTION:
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.
38
The console does not light up.
Check to make sure the power switch located on the backside
of the console is turned on.
Make sure the power adapter is plugged into the base of the
Elliptical Trainer.
Make sure the wire harness is plugged into the back of the console.
You feel a thump or hitch in the stride motion.
Check assembly and tightness of all hardware.
Wipe off the roller wheels. They could have taken on debris
that is causing the thump.
Check the bolts and the bracket under the footplate. At times,
these can be over-tightened which cause friction to the pivoting
footplate and may lead to a thump or hitch.