Copying From A Camcorder - Toshiba D-R255-SG Owner's Manual

00838A-D-R255-SG_43~51 6/10/05
Copying from a
Camcorder
You may control the Camcorder using the IEEE1394
(DV) interface.
Before you start
Check that the disc has enough available space for
the recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
Press the OPEN/CLOSE button to close
2
the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 42.)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 42.)
Press the REC MODE button repeatedly,
3
(or Press the REC MODE button, then
press the ...† button) to select the
recording speed(quality).
© ©
SP
4 Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
46
- English
3:48 PM Page 46
© ©
LP EP XP
Record Mode SP (02:12)
DV
The DV device is connected.
MOVE OK RETURN
5 Select the Play icon on the upper part of the
screen to playback the camcorder and find
the starting position to copy.
You can press the PLAY button of the remote control
to play the camcorder.
To start recording, use the œ √ to select
6
( G ) icon in the top side of the screen, then
press the OK button.
You can press the REC button of the remote control
to start recording. To display playback related icons
on the screen, press any direction button on the
remote control.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
When using DVD-RAM/DVD-RW/DVD-R discs, the
G
message 'Updating the information of disc. Please
wait for a moment' is displayed
You can not change the recording mode and
I
input source while recording.
NOTE
Recording will stop automatically if there is
I
no free space left for recording.
Up to 99 titles can be recorded onto a disc.
I
Recording will stop automatically if a copy
I
protected image is selected.
DVD-RAM/DVD-RW discs must be
I
formatted before starting to record. Most
new discs are sold unformatted.
Do not use DVD-R authoring discs with this
I
unit.