Table of Contents
Advertisement
30
a curve or turn and colliding with the
roadway or a fixed object.
Every curve is different. Be alert to
whether a curve remains constant,
gradually widens, gets tighter or
involves multiple turns. Ride within your
skill level and posted speed limits.
Your best path may not always follow
the curve of the road. Change lane
position depending on traffic, road
conditions and curve of the road. If no
traffic is present, start at the outside
of a curve to increase your line of sight
and the effective radius of the turn. As
you turn, move toward the inside of the
curve, and as you pass the center, move
to the outside to exit.
Another alternative is to move to the
center of your lane before entering a
curve — and stay there until you exit.
This permits you to spot approaching
traffic as soon as possible. You can also
adjust for traffic "crowding" the center
line, or debris blocking part of your lane.
haNDLiNg DaNgerOUS
SUrFaCeS
Your chance of falling or being
involved in a crash increases whenever
you ride across:
• Uneven surfaces or obstacles.
• Slippery surfaces.
• Railroad tracks.
• Grooves and gratings.
Uneven Surfaces
and Obstacles
Watch for uneven surfaces such as
bumps, broken pavement, potholes or
small pieces of highway trash.
Try to avoid obstacles by slowing or
going around them. If you must go
over the obstacle, first determine if it is
ridewithinyourabilities
possible. Approach it at as close to a 90˚
angle as possible. Look where you want
to go to control your path of travel. If you
have to ride over the obstacle, you should:
• Slow down as much as possible
before contact.
• Make sure the motorcycle is
straight.
• Rise slightly off the seat with your
weight on the footrests to absorb
the shock with your knees and
elbows, and avoid being thrown off
the motorcycle.
• Just before contact, roll on the
throttle slightly to lighten the front
end.
If you ride over an object on the
street, pull off the road and check your
tires and rims for damage before riding
any farther.
Slippery Surfaces
Motorcycles handle better when
ridden on surfaces that permit good
traction. Surfaces that provide poor
traction include:
• Wet pavement, particularly just after
it starts to rain and before surface oil
washes to the side of the road.
• Gravel roads, or where sand and
gravel collect.
• Mud, leaves, snow, and ice�
• Lane markings (painted lines),
steel plates and manhole covers,
especially when wet.
To ride safely on slippery surfaces:
• Reduce Speed — Slow down
before you get to a slippery
surface to lessen your chances of
skidding. Your motorcycle needs
more distance to stop. And it is
particularly important to reduce
speed before entering wet curves.
• Avoid Sudden Moves — Any
sudden change in speed or direction
Advertisement
Chapters
Table of Contents
