Jensen VM9114 Operating Instructions Manual page 22

Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six
stored stations (P1-P6) for the current band appear on the screen.
Storing a Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the preset screen.
3. Touch the preset number in which you would like to store the current
station (or touch Exit to cancel and close the menu). The preset number
and station appears highlighted.
Recalling a Station
1. Select a band (if needed).
2. Touch an on-screen preset button (6) to select the corresponding stored
station.
Auto Store/Preview Scan (AS/PS)
Auto Store (AS)
To select six strong stations and store them in the current band:
1. Select a band (if needed).
2. Touch the AS button (16) on page 2/2 of the on-screen controls to activate
the Auto Store function.
The new stations replace stations already stored in that band.
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations in your
particular area, touch the PS button (20). Touch again to stop preview scan.
Preset: _
P1 P2
P3
P5 P6
P4
E x i t
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1MHz
P5 107.9MHz
P6 102.9MHz
18
VM9114