Nikon COOLPIX L610 Quick Start Manual page 273

Hide thumbs Also See for COOLPIX L610:
Table of Contents

Advertisement

Problem
No sound when shutter is
released.
AF-assist illuminator does
not light.
Images appear smeared.
Colors are unnatural.
Randomly spaced bright
pixels ("noise") appear in
image.
Images are too dark
(underexposed).
Images are too bright
(overexposed).
F12
Cause/Solution
• Off is selected for Sound settings > Shutter
sound in the setup menu. No sound is heard with
some shooting modes and settings, even when On
is selected.
• Do not block the speaker.
Off is selected for AF assist in the setup menu. AF-
assist illuminator may not light depending on the
current scene mode, even when Auto is selected.
Lens is dirty. Clean lens.
White balance or hue is not adjusted properly.
The subject is dark, so shutter speed is too slow or ISO
sensitivity is too high. Noise can be reduced by:
• Using flash.
• Specifying a lower ISO sensitivity setting.
• The flash is lowered or a shooting mode in which
the flash does not fire is selected.
• Flash window is blocked.
• Subject is beyond flash range.
• Adjust exposure compensation.
• Increase ISO sensitivity.
• Subject is backlit. Select Backlighting in scene mode,
or raise the flash and set the flash mode to X (fill flash).
Adjust exposure compensation.
A
98, E80
3
98, E78
F6
41, 64,
E41
53
64, E46
5, 53, 61
26
53
60
64, E46
42, 53
60

Advertisement

Table of Contents
loading

Table of Contents