Page 3
Introduction Parts of the Camera The Basics of Shooting and Playback Shooting Features Playback Features Recording and Playing Back Movies General Camera Setup Connecting the Camera to a TV, Computer, or Printer Reference Section Technical Notes and Index...
Introduction Read This First Thank you for purchasing the Nikon COOLPIX L620 digital camera. Before using the camera, please read the information in “For Your Safety” (A viii-xi) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer...
About This Manual If you want to start using the camera right away, see “The Basics of Shooting and Playback” (A 10). To learn about the parts of the camera and information that is displayed in the monitor, see “Parts of the Camera” (A 1).
Page 6
Other Information Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used in this manual: Icon Description This icon indicates cautions and information that should be read before using the camera. This icon indicates notes and information that should be read before using the camera.
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Page 8
Nikon will not be held liable for any damages resulting from the use of this product. While every effort was made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately).
Page 9
Disposing of Data Storage Devices Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them.
Page 11
The EN-MH2 rechargeable batteries sunlight are for use with Nikon digital cameras only, and are compatible Failure to observe this precaution with COOLPIX L620. could cause damage or fire.
Page 12
Should the insulation the batteries when no charge be damaged and the wires become remains. exposed, take it to a Nikon- Discontinue use immediately should authorized service representative for you notice any change in the inspection. Failure to observe these...
Page 13
When connecting cables to the input person or object and output jacks, use only the cables Failure to observe this precaution provided or sold by Nikon for the could result in burns or fire. purpose, to maintain compliance with product regulations.
Nikon determined by turning the equipment Corporation may void the user’s off and on, the user is encouraged to try authority to operate the equipment.
Page 15
Interface Cables Notice for Customers in Europe Use the interface cables sold or This symbol indicates that provided by Nikon for your equipment. electrical and electronic Using other interface cables may equipment is to be collected exceed the limits of Class B Part 15 of separately.
Page 16
This symbol on the batteries indicates that the batteries are to be collected separately. The following apply only to users in European countries: All batteries, whether marked with this symbol or not, are designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
Table of Contents Step 3 Frame a Picture ........22 Introduction ........... ii Using the Zoom ............23 Read This First ............ii Step 4 Focus and Shoot........24 About This Manual ..........iii The Shutter-release Button ......25 Information and Precautions......v Step 5 Play Back Images .........
Page 18
Focusing............... 54 Reference Section ......... E1 Using Face Detection .......... 54 Using Easy Panorama Using Skin Softening..........55 (Shooting and Playback) ......E2 Using Target Finding AF ........56 Shooting with Easy Panorama ....E2 Subjects Not Suitable for Autofocus..57 Viewing Images Captured with Easy Focus Lock..............
Page 19
The Movie Menu ........E58 Connecting the Camera to a TV (Viewing Images on a TV)......E22 Movie Options..........E58 Autofocus Mode ..........E61 Connecting the Camera to a Printer (Direct Print)..........E24 Wind Noise Reduction ....... E61 The Setup Menu ......... E62 Connecting the Camera to a Printer ...
Page 20
Technical Notes and Index....F1 Caring for the Product ......... F2 The Camera............F2 Batteries..............F3 Memory Cards............F5 Cleaning and Storage........F6 Cleaning..............F6 Storage ..............F7 Troubleshooting ..........F8 Specifications ..........F16 Approved Memory Cards......F20 Index..............F23 xviii...
Attaching the Camera Strap Pass the strap through either the left or right strap eyelet and attach the strap. Raising and Lowering the Flash Slide the K (flash pop-up) control to raise the flash. See “Using the Flash” (A 41) for more information about flash settings. Push the flash down gently to lower the flash until it clicks into place when not in use.
Using Menus (d Button) Use the multi selector and k button to navigate the menus. Press the d button. Press the multi selector J. The menu is displayed. The current menu icon is displayed in yellow. Shooting menu Image mode White balance Continuous ISO sensitivity...
Page 25
Press the k button. Select a menu option. The settings for the option you selected are displayed. Vibration reduction Welcome screen Time zone and date Monitor settings Print date Vibration reduction Motion detection AF assist Press the k button. Select a setting. The setting you selected is applied.
The Monitor The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. By default, information is displayed when the camera is first turned on and when you operate the camera, and turns off after a few seconds (when Photo info is set to Auto info in Monitor settings (A 69)).
Page 27
Shooting mode..........20, 21 Focus area (face detection, pet detection) ........24, 34, 37 Flash mode............. 41 Aperture value ............25 Macro mode ............46 Shutter speed............25 Zoom indicator ..........23, 46 Travel destination icon ........69 Focus indicator............. 24 ISO sensitivity............51 Movie options (normal speed movies)..66 Battery level indicator ........18 Movie options (HS movies) ......
The Basics of Shooting and Playback Preparation 1 Insert the Batteries Open the battery-chamber/memory card slot cover. Hold the camera upside down to prevent the batteries from falling out. Insert the batteries. Confirm that the positive (+) and negative (–) terminals are oriented correctly and insert the batteries.
Page 31
Removing the Batteries Turn the camera off and make sure that the power-on lamp and the monitor have turned off, and then open the battery-chamber/memory card slot cover. The camera, batteries, and memory card may be hot immediately after using the camera. Notes About the Batteries Do not combine old and new batteries or batteries of different makes or types.
Preparation 2 Insert a Memory Card Turn off the camera and open the battery- chamber/memory card slot cover. Hold the camera upside down to prevent the batteries from falling out. Insert the memory card. Slide the memory card in until it clicks into place. Memory card slot Be Careful to Insert the Memory Card in Correct Direction...
Formatting Memory Cards The first time you insert a memory card that has been used in another device into this camera, make sure to format it with this camera. Insert the card into the camera, press the d button, and select Format card in the setup menu.
Preparation 3 Setting the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. If you exit without setting the date and time, O will flash when the shooting screen is displayed.
Page 35
Select your home time zone and London, Casablanca press the k button. To enable daylight saving time, press H. When the daylight saving time function is enabled, W is displayed above the map. To turn off the daylight saving time function, press I.
Page 36
Press the A button. Date and time The shooting-mode selection screen is displayed. Press this button in shooting mode for shooting-mode selection menu. Edit When Easy auto mode is displayed, press the Easy auto mode k button. The camera enters the shooting mode and you can take images in Easy auto mode (A 20).
Page 37
Changing the Language Setting and the Date and Time Setting You can change these settings using the Language and Time zone and date settings in the z setup menu (A 69). You can enable or disable daylight saving time in the z setup menu by selecting Time zone and date followed by Time zone.
Step 1 Turn the Camera On Press the power switch. The monitor turns on. To turn the camera off, press the power switch again. Check the battery level indicator and the number of exposures remaining. Battery level indicator Display Description The battery level is high.
Page 39
Notes About the Flash When you need to use the flash, such as when shooting in dark locations or when the subject is backlit, slide the K (flash pop-up) control to raise the flash (A 3, 41). The Auto Off Function Flashes No operations No operations...
Step 2 Select a Shooting Mode Press the A button. Use the multi selector HI to select a Easy auto mode shooting mode and press the k button. G (easy auto) mode is used in this example. The shooting mode setting is saved even after the camera is turned off.
Available Shooting Modes A 29 Easy auto mode The camera automatically selects the optimum scene mode when you frame an image, making it even easier to take images using settings that suit the scene. A 30 Scene mode Camera settings are optimized according to the scene that you select. A 35 Special effects Effects can be applied to images during shooting.
Step 3 Frame a Picture Hold the camera steady. Keep fingers and other objects away from the lens, flash, AF-assist illuminator, microphone, and speaker. Frame the picture. Shooting mode icon When the camera automatically determines the scene mode, the shooting mode icon changes (A 29). 2 5 m 0 s 2 5 m 0 s 7 8 0...
Notes About Easy Auto Mode Depending upon shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (A 30, 35, 37, 39). When the digital zoom is in effect, the scene mode changes to U. When Using a Tripod We recommend using a tripod to stabilize the camera in the following situations.
Step 4 Focus and Shoot Press the shutter-release button halfway. When the subject is in focus, the focus area glows green (multiple focus areas can glow green). When you are using digital zoom, the camera focuses on the subject in the center of the frame and the focus area is not displayed.
The Shutter-release Button To set focus and exposure (shutter speed and aperture value), press the shutter-release button lightly until you feel a slight Press halfway resistance. Focus and exposure remain locked while the shutter- release button is pressed halfway. Press the shutter-release button all the way to release the shutter and take an image.
Step 5 Play Back Images Press the c (playback) button. If you press and hold down the c (playback) button while the camera is turned off, the camera turns on in playback mode. c (playback) button Use the multi selector to select an image to Display the previous image display.
Step 6 Delete Images Press the l button to delete the image currently displayed in the monitor. Use the multi selector HI to select the desired deletion method and press the Delete k button. Current image To exit without deleting, press the d button. Erase selected images All images Select Yes and press the k button.
Page 48
Operating the Erase Selected Images Screen Use the multi selector JK to select an image Erase selected images to be deleted, and then use H to display c. To undo the selection, press I to remove c. Move the zoom control (A 1) toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail playback.
Shooting Features G (Easy Auto) Mode The camera automatically selects the optimum scene mode when you frame an image, making it even easier to take images using settings that suit the scene. Enter shooting mode M A (shooting mode) button M G (easy auto) mode M k button Automatic Scene Selection When the camera selects a scene mode, the shooting mode icon displayed in the shooting screen changes to that for the scene mode currently enabled.
Scene Mode (Shooting Suited to Scenes) When a scene is selected, camera settings are automatically optimized for the selected scene. Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M HIJK M select a scene M k button * The icon of the last scene selected is displayed.
Tips and Notes d Sports While the shutter-release button is held all the way down, the camera shoots up to about 6 images continuously at a rate of about 2 fps (when Image mode is set to r 4896×3672). The frame rate for continuous shooting may vary depending upon the current image mode setting, the memory card used, or shooting condition.
j Night landscape From the screen displayed after j Night landscape is selected, select Hand-held or Tripod. Hand-held (default setting): - When the j icon at the top left of the monitor glows green, press the shutter-release button all the way to capture a series of images which are combined into a single image and saved. - Once the shutter-release button is pressed all the way, hold the camera still until a still image is displayed.
l Museum The camera captures a series of up to ten images while the shutter-release button is held all the way down, and the sharpest image in the series is automatically selected and saved (BSS (Best Shot Selector)). The flash does not fire. m Fireworks show The shutter speed is fixed at about four seconds.
O Pet portrait When you point the camera at a dog or cat, the camera detects the pet’s face and focuses on it. By default, the shutter is automatically released when focus is acquired (pet portrait auto release). From the screen displayed after O Pet portrait is selected, select Single or Continuous. - Single: Whenever the detected face is in focus, the camera captures one image.
Special Effects Mode (Applying Effects When Shooting) Effects can be applied to images during shooting. Enter shooting mode M A (shooting mode) button M G (third icon from the top*) M K M HIJK M select an effect M k button * The icon of the last effect selected is displayed.
Page 56
The camera focuses on the area in the center of the frame. When Selective color is selected, use the multi selector HI to select the desired color from the slider. To change settings for any of the following functions, press the k button to cancel color selection.
Smart Portrait Mode (Capturing Images of Smiling Faces) When the camera detects a smiling face, you can take an image automatically without pressing the shutter-release button (smile timer (A 51)). You can use the skin softening option to smooth the skin tones of human faces. Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k button Frame the picture.
Page 58
Functions Available in Smart Portrait Mode Flash mode (A 41) Self-timer (A 44) Exposure compensation (A 47) Smart portrait menu (A 50)
A (Auto) Mode Used for general shooting. Settings can be adjusted to suit the shooting conditions and the type of shot you want to capture. Enter shooting mode M A (shooting mode) button M A (auto) mode M k button You can change how the camera selects the area of the frame to focus on by changing the AF area mode setting (A 51).
Functions That Can Be Set Using the Multi Selector The functions that are available vary with the shooting mode, as shown below. G (easy Special Smart Scene auto) effects portrait (auto) 1 X Flash mode (A 41) – 2 n Self-timer (A 44) 3 p Macro (A 46) –...
Using the Flash In dark locations or when the subject is backlit, you can take images with the flash by raising the flash. When using A (auto) mode and other shooting modes, you can select the flash mode to match the shooting conditions. Slide the K (flash pop-up) control.
Available Flash Modes Auto The flash fires when necessary, such as in dim lighting. The flash mode icon on the shooting screen is displayed only immediately after the setting is made. Auto with red-eye reduction Reduce red-eye in portraits caused by the flash (A 43). Fill flash The flash fires whenever an image is taken.
Page 63
Lowering the Flash Push the flash down gently to lower the flash until it clicks into place when not in use (A 3). The Flash Lamp The status of the flash can be confirmed by pressing the shutter- release button halfway. On: The flash fires when you press the shutter-release button all the way down.
Using the Self-timer The camera is equipped with a self-timer that releases the shutter about ten seconds after you press the shutter-release button. Set Vibration reduction to Off in the setup menu (A 69) when using a tripod to stabilize the camera during shooting.
Page 65
Press the shutter-release button the rest of the way down. Countdown starts. The self-timer lamp flashes and then glows steadily about one second before the shutter is released. When the shutter is released, the self-timer is set to OFF. 1 / 2 5 0 1 / 2 5 0 F 3.3 F 3.3...
Using Macro Mode Use macro mode when taking close-up images. Press the multi selector I (p). Select ON and press the k button. Macro mode If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled. Move the zoom control to set the zoom ratio to a position where F and the zoom indicator glow green.
Adjusting Brightness (Exposure Compensation) You can adjust overall image brightness. Press the multi selector K (o). Select a compensation value and press the Exposure compensation k button. + 2 . 0 To brighten the image, set a positive (+) value. + 0 .
Default Settings Default settings for each shooting mode are described below. Exposure Flash Self-timer Macro compensation (A 41) (A 44) (A 46) (A 47) G (easy auto) Scene b (portrait) c (landscape) d (sports) e (night portrait) f (party/indoor) Z (beach) z (snow) h (sunset) i (dusk/dawn)
Page 69
The setting that is used when the flash is raised. The setting cannot be changed. The camera automatically selects the flash mode appropriate for the scene it has selected. The setting cannot be changed. Automatically changes to macro mode when the camera selects Close-up.
Functions That Can Be Set with the d Button (Shooting Menu) The settings listed below can be changed by pressing the d button during shooting. Image mode White balance Continuous ISO sensitivity Color options 2 5 m 0 s 2 5 m 0 s AF area mode 7 8 0 7 8 0...
Options Available in the Shooting Menu Option Description Allows you to set the combination of image size and image quality Image mode used when saving images. Default setting: r 4896×3672 Allows you to adjust white balance to suit the weather conditions or light source in order to make the colors in images match what you see White balance with your eyes.
Functions That Cannot Be Used Simultaneously Some functions cannot be used with other menu options. Restricted Option Description function When a setting other than Single is selected, the flash Continuous (A 51) cannot be used. Flash mode Smile timer (A 51) When On (BSS) is selected, the flash cannot be used.
Page 73
Restricted Option Description function When Smile timer is set to On (BSS), Blink proof is Blink proof Smile timer (A 51) fixed at Off. When Continuous H: 120 fps or Continuous H: 60 Print date Continuous (A 51) fps is selected, date and time cannot be imprinted on images.
Focusing The focus area varies depending on the shooting mode. Using Face Detection In the following shooting modes, the camera uses face detection to automatically focus on human faces. e/b Portrait, h/c Night portrait, or d Backlighting in G (easy auto) mode (A 29) Portrait or Night portrait in scene mode (A 30) Smart portrait mode (A 37) 2 5 m 0 s...
Using Skin Softening When the shutter is released while using one of the shooting modes listed below, the camera detects human faces and processes the image to soften facial skin tones (up to three faces). Smart portrait mode (A 37) e Portrait, h Night portrait, or d Backlighting in G (easy auto) mode (A 29) Portrait or Night portrait in scene mode (A 30) Skin softening can also be applied to saved images (A 61, E17).
Using Target Finding AF When AF area mode (A 51) in A (auto) mode is set to Target finding AF, the camera focuses in the manner described below when you press the shutter-release button halfway: The camera detects the main subject and focuses on it. When the subject is in focus, the focus area glows green.
Subjects Not Suitable for Autofocus The camera may not focus as expected in the following situations. In some rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator glows green: Subject is very dark Objects of sharply differing brightness are included in the scene (e.g.
Focus Lock Focus lock shooting is recommended when the camera does not activate the focus area that contains the desired subject. Set AF area mode to Center in A (auto) mode (A 51). Position the subject in the center of the frame and press the shutter- release button halfway.
Playback Features Playback Zoom Moving the zoom control toward g (i) in full-frame playback mode (A 26) zooms in on the image. 4 / 4 4 / 4 g (i) Displayed area guide 0 0 0 4 . J P G 0 0 0 4 .
Functions That Can Be Set with the d Button (Playback Menu) When viewing images in full-frame playback mode or thumbnail playback mode, you can configure the menu operations listed below by pressing the d button. Option Description Allows you to create retouched copies in which contrast and Quick retouch* saturation have been enhanced.
Page 82
Option Description Allows you to select whether to display only the key picture for a sequence of images captured continuously, or to display the Sequence display sequence as individual images. options When only the key picture is displayed for a sequence, press the k button to display each image in the sequence.
Recording and Playing Back Movies Recording Movies Display the shooting screen. Check the remaining amount of movie recording time. If Photo info in Monitor settings (A 69) in the setup menu is set to Movie frame+auto info, the area that will be visible in the movie can be confirmed before movie recording starts.
Page 84
Maximum Movie Length Individual movie files cannot exceed 4 GB in size or 29 minutes in length, even when there is sufficient free space on the memory card for longer recording. The maximum movie length for a single movie is displayed on the shooting screen. Recording may end before either limit is reached if camera temperature becomes elevated.
Page 85
Camera Temperature The camera may become warm when shooting movies for an extended period of time or when the camera is used in a hot area. If the inside of the camera becomes extremely hot when recording movies, the camera will automatically stop recording.
Functions That Can Be Set with the d Button (Movie Menu) Enter shooting mode M d button M D menu icon M k button The settings of the menu options listed below can be configured. Movie options Autofocus mode Wind noise reduction Option Description Select the movie type.
Playing Back Movies Press the c button to enter playback mode. 1 0 s 1 0 s Movies are indicated by the movie options icon (A 66). Press the k button to play back movies. 0 0 1 0 . M O V 0 0 1 0 .
Page 88
Functions Available During Playback Playback controls are displayed in the monitor. The operations listed below can be performed by using the multi selector JK to select a control and then pressing the k Paused button. Function Icon Description Hold down the k button to rewind the movie. Rewind Hold down the k button to advance the movie.
General Camera Setup Functions That Can Be Set with the d Button (Setup Menu) Press the d button M z (setup) menu icon M k button The settings of the menu options listed below can be Welcome screen configured. Time zone and date Monitor settings Print date Vibration reduction...
Page 90
Option Description Sound settings Allows you to adjust sound settings. Allows you to set the amount of time that passes before the Auto off monitor turns off to save power. Format memory/ Allows you to format the internal memory or the memory card. Format card Language Allows you to change the camera’s display language.
Connecting the Camera to a TV, Computer, or Printer Connection Methods You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. USB/audio/video output connector HDMI micro connector (Type D) Open the Insert the plug straight.
Page 92
Viewing images on a TV Images and movies captured with the camera can be viewed on a TV. Connection method: Connect the video and audio plugs of the optional audio video cable to the TV’s input jacks. Alternatively, connect a commercially available HDMI cable to the TV’s HDMI input jack.
An Internet connection is required. Compatible Operating Systems Windows Windows 8, Windows 7, Windows Vista, Windows XP Macintosh Mac OS X 10.6, 10.7, 10.8 Refer to the Nikon website for details on system requirements, including the latest information on operating system compatibility.
Page 94
Start the computer and insert the ViewNX 2 CD-ROM into the CD-ROM drive. Windows: If instructions for operating the CD-ROM are displayed in the window, follow the instructions to proceed to the installation window. Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon. Select a language in the language selection dialog to open the installation window.
Page 95
The following software is installed: ViewNX 2 (consisting of the three modules below) - Nikon Transfer 2: For transferring images to the computer - ViewNX 2: For viewing, editing, and printing transferred images - Nikon Movie Editor: For basic editing of transferred movies Panorama Maker (for creating a single panorama image of a landscape, etc.
Transferring Images to the Computer Choose how images will be copied to the computer. Choose one of the following methods: Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the USB cable. Turn the camera on. To transfer images that are saved in the camera’s internal memory, remove the memory card from the camera before connecting it to the computer.
Nikon Transfer 2 and click OK. 2 Double-click Import File. If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts. Connecting the USB Cable The connection may not be recognized if the camera is connected to the computer via a USB hub.
Terminate the connection. If the camera is connected to the computer, turn the camera off and disconnect the USB cable. If you are using a card reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the card from the card reader or card slot.
Reference Section The Reference Section provides detailed information and hints about using the camera. Shooting Using Easy Panorama (Shooting and Playback)......... E2 Playback Favorite Pictures Mode................E6 Auto Sort Mode....................E10 List by Date Mode ..................E11 Viewing and Deleting Images Captured Continuously (Sequence)..E12 Editing Still Images ..................
Using Easy Panorama (Shooting and Playback) Shooting with Easy Panorama Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M HIJK M p (easy panorama) M k button * The icon of the last scene selected is displayed. Select Normal (180°) or Wide (360°) as the Easy panorama shooting range and press the k button.
Page 101
Press the shutter-release button all the way, and then remove your finger from the shutter-release button. KLJI are displayed to indicate the direction of camera movement. Move the camera in one of the four directions Guide until the guide indicator reaches the end. When the camera detects which direction it is moving in, shooting begins.
Page 102
Notes About Easy Panorama Shooting The range of the image seen in the saved image is narrower than that seen in the monitor at the time of shooting. If the camera is moved too quickly or shaken too much, or if the subject is too uniform (e.g. walls or darkness), an error may occur.
Viewing Images Captured with Easy Panorama Switch to playback mode (A 26), display an image captured 4 / 4 4 / 4 using easy panorama in full-frame playback mode, and then press the k button to scroll the image in the direction that was used when shooting.
Favorite Pictures Mode By adding images (except movies) to albums as favorite pictures, you can play back only the added images. Images can be sorted into nine albums. Up to 200 images can be added to each album. The original images are not copied or moved. The same image can be added to multiple albums.
Playing Back Images in Albums Press the c button (playback mode) M c button M h Favorite pictures M k button Use the multi selector to select an album and then press the Favorite pictures k button to play back the images in the selected album. Functions in the playback menu (A 61) can be used for the images in the selected album (except Copy and Favorite pictures).
Removing Images from Albums Enter h Favorite pictures mode M select the album containing the image you want to remove M k button M d button M Remove from favorites M k button Use the multi selector JK to select an image Remove from favorites and use H to hide L.
Changing the Favorites Album Icon Press the c button (playback mode) M c button M h Favorite pictures M k button Use the multi selector to select an album and Favorite pictures press the d button. Choose icon Use JK to select an icon color and press the Choose icon k button.
Auto Sort Mode Images are automatically sorted into categories, such as portraits, landscapes, and movies, based on the camera settings at the time of shooting. Press the c button (playback mode) M c button M F Auto sort M k button Use the multi selector to select a category and then press the Portraits k button to play back the images in the selected category.
List by Date Mode Press the c button (playback mode) M c button M C List by date M k button Use the multi selector to select a date and then press the List by date k button to play back the images captured on the selected 2 0 / 1 1 / 2 0 1 3 date.
Viewing and Deleting Images Captured Continuously (Sequence) Viewing Images in a Sequence Images captured continuously are saved as a sequence. The first image of a sequence is used as the key picture to 1 / 5 1 / 5 represent the sequence when displayed in full-frame playback mode or thumbnail playback mode (default setting).
Deleting Images in a Sequence When the l button is pressed for images in a sequence, the images that are deleted vary depending on how the sequences are displayed. When the key picture is displayed: - Current image: All images in the displayed sequence are deleted. - Erase selected images: When a key picture is selected on the erase selected images screen (A 28), all images in that sequence are deleted.
Editing Still Images Before Editing Images You can easily edit images on this camera. Edited copies are saved as separate files. Edited copies are saved with the same shooting date and time as the original. Restrictions on Image Editing When an edited copy is further modified with another editing function, check the following restrictions.
Quick Retouch: Enhancing Contrast and Saturation Press the c button (playback mode) M select an image M d button M Quick retouch M k button Use the multi selector HI to select the amount Quick retouch of effect applied and press the k button. The edited version is displayed on the right.
Red-eye Correction: Correcting Red Eyes Caused by Using the Flash Press the c button (playback mode) M select an image M d button M Red-eye correction M k button Preview the result and press the k button. Red-eye correction To exit without saving the copy, press the multi selector J. Back Back Save...
Skin Softening: Softening Skin Tones Press the c button (playback mode) M select an image M d button M Skin softening M k button Use the multi selector HI to select the Skin softening amount of effect applied and press the k button.
Filter Effects: Applying Digital Filter Effects Press the c button (playback mode) M select an image M d button M Filter effects M k button Type Description Allows you to give the entire image a yellowish hue and darken the image Toy camera effect 1 periphery.
Page 117
Adjust the effect and press the k button. When using Soft: Use HI to select the range of the Soft effect. When using Selective color: Use HI to select the color to be retained. Press J to return to the Filter effects selection screen without making any changes.
Small Picture: Reducing the Size of an Image Press the c button (playback mode) M select an image M d button M Small picture M k button Use the multi selector HI to select the Small picture desired copy size and press the k button. Images taken at an image mode setting of s 4896×2754 640×480 are saved at 640 ×...
Crop: Creating a Cropped Copy Move the zoom control to enlarge the image (A 59). Refine copy composition and press the d button. Move the zoom control toward g (i) or f (h) to adjust the zoom ratio. Set a zoom ratio at which u is displayed.
Connecting the Camera to a TV (Viewing Images on a TV) Turn off the camera and connect it to the TV. Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them. When using the audio/video cable Yellow White...
Page 121
Set the TV’s input to external video input. See the documentation provided with your TV for details. Hold down the c button to turn on the camera. Images are displayed on the TV. The camera monitor does not turn on. If the Images Are Not Displayed on the TV Make sure that TV settings (E73) in the setup menu conforms to the standard used by your TV.
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible printers can connect the camera directly to the printer and print images without using a computer. Take images Select images for printing and number of copies using Print order option (E46) Connect to the printer (E25) Print images one at a time Print multiple images (E28)
Connecting the Camera to a Printer Turn off the camera. Turn on the printer. Check printer settings. Connect the camera to the printer using the USB cable. Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them.
Printing Individual Images Use the multi selector to select the desired Print selection 1 5 / 1 1 / 2 0 1 3 N o . 3 2 image and press the k button. Move the zoom control toward f (h) to switch to thumbnail playback or g (i) to switch to full-frame playback.
Page 125
Select the desired paper size and press the Paper size k button. Default 3.5×5 in. To apply the paper size setting configured on the printer, 5×7 in. select Default as the paper size option. The paper size options available on the camera vary 100×150 mm depending on the printer that you use.
Printing Multiple Images When the Print selection screen is displayed, Print selection 1 5 / 1 1 / 2 0 1 3 N o . 3 2 press the d button. Use the multi selector HI to select Paper Print menu size and press the k button.
Page 127
Print selection Select images (up to 99) and the number of copies Print selection (up to nine) of each. Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. Images selected for printing are indicated by a and the numeral indicating the number of copies to be printed.
DPOF printing Print images for which a print order was created DPOF printing using the Print order option (E46). When the screen shown on the right is displayed, select Start print and press the k button to prints start printing. Start print To view the current print order, select View View images...
Editing Movies The desired portions of a recorded movie can be saved as a separate file. Play back the desired movie and pause at the start point of the portion that is to be extracted (A 68). Use the multi selector JK to select the I 1 m 3 0 s 1 m 3 0 s control, and then press the k button.
Page 130
Use HI to select m (Save) and press the Save k button. Follow the instructions on the screen to save the movie. 3 0 s 3 0 s Notes About Movie Editing Movies recorded using p iFrame 540/30p or p iFrame 540/25p (E58) cannot be edited.
The Shooting Menu (for A (Auto) Mode) Image Mode Settings (Image Size and Quality) Enter shooting mode M d button M Shooting menu M Image mode M k button Select the combination of image size and compression ratio that is used when saving images. The higher the image mode setting, the larger the size at which images can be printed, and the lower the compression ratio, the higher the quality of the images, but the number of images that can be saved is reduced.
Page 132
Notes About Image Mode The image mode setting can also be changed in shooting modes other than A (auto) mode. The changed setting is also applied to other shooting modes. The setting may not be changed when using certain settings of other functions. Number of Images That Can Be Saved The approximate number of images that can be saved can be checked in the monitor when shooting (A 18).
White Balance (Adjusting Hue) Select A (auto) mode M d button M White balance M k button Adjust white balance to suit the light source or weather conditions in order to make the colors in images match what you see with your eyes. Use Auto under most conditions.
Page 134
Using Preset Manual Use the procedure below to measure the white balance value under the lighting used during shooting. Place a white or gray reference object under the lighting that will be used during shooting. Use the multi selector HI to select Preset White balance Auto Auto...
Page 135
Press the k button to measure the value. The shutter is released and measurement is complete. No image is saved. Notes About Preset Manual A value for flash lighting cannot be measured with Preset manual. When shooting using the flash, set White balance to Auto or Flash.
Continuous Shooting Select A (auto) mode M d button M Continuous M k button Option Description U Single One image is taken each time the shutter-release button is pressed. (default setting) While the shutter-release button is held all the way down, images are captured continuously.
Notes About Continuous Shooting When a setting other than Single is selected, the flash cannot be used. Focus, exposure, and white balance are fixed at the values determined with the first image in each series. It may take some time to save the images after shooting. When ISO sensitivity increases, noise may appear in captured images.
ISO Sensitivity Select A (auto) mode M d button M ISO sensitivity M k button Higher ISO sensitivity allows darker subjects to be captured. Additionally, even with subjects of similar brightness, images can be taken at faster shutter speeds, and blurring caused by camera shake and subject movement can be reduced.
Color Options Select A (auto) mode M d button M Color options M k button Make colors more vivid or save images in monochrome. Option Description n Standard color Use to achieve natural colors in your images. (default setting) o Vivid color Use to achieve a vivid, “photoprint”...
AF Area Mode Select A (auto) mode M d button M AF area mode M k button Use this option to determine how the camera selects the focus area for autofocus. Option Description The camera focuses on the subject in the center of the frame.
The Smart Portrait Menu See “Image Mode Settings (Image Size and Quality)” (E33) for information about Image mode. Skin Softening Enter smart portrait mode M d button M Skin softening M k button Option Description When the shutter is released, the camera detects one or more human e On (default setting) faces (up to three), and processes the image to soften facial skin tones before saving the image.
Smile Timer Enter smart portrait mode M d button M Smile timer M k button The camera detects human faces and then automatically releases the shutter whenever a smile is detected. Option Description a On (single) Whenever a smile is detected, the camera captures one image. Whenever a smile is detected, the camera captures up to 5 images a D On (BSS) continuously and saves the one that best captured the smile.
Blink Proof Enter smart portrait mode M d button M Blink proof M k button Option Description The camera automatically releases the shutter twice with every shot and saves one image in which the subject’s eyes are open. A blink was detected in the If the camera saved an image in picture just taken.
The Playback Menu See “Editing Still Images” (E14) for information about image editing functions. See “Favorite Pictures Mode” (E6) for information about Favorite pictures and Remove from favorites. Print Order (Creating a DPOF Print Order) Press the c button (playback mode) M d button M Print order M k button If you configure print order settings in advance, you can use them with the printing methods listed below.
Select images (up to 99) and the number of Print selection copies (up to nine) of each. Use the multi selector JK to select images, and use HI to specify the number of copies to be printed. Images selected for printing are indicated by a and the numeral indicating the number of copies to be printed.
Page 146
Notes About Print Order When a print order is created in favorite pictures mode, auto sort mode, or list by date mode, the screen shown below is displayed if images other than those in the selected album, category, or shooting date have been marked for printing. Yes: Does not remove print markings from other images, and adds the current print order settings.
Page 147
Notes About Printing Shooting Date and Shooting Information Some printers may not be able to print the shooting date and shooting information. Shooting information is not printed when the camera is connected to a printer. The Date and Info settings are reset each time the Print order option is displayed. The date printed is that saved when the image was captured.
Slide Show Press the c button (playback mode) M d button M Slide show M k button Play back images one by one in an automated “slide show.” When movie files are played back in the slide show, only the first frame of each movie is displayed. Use the multi selector HI to select Start Slide show and press the k button.
Protect Press the c button (playback mode) M d button M Protect M k button The camera protects selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from the image selection screen (E52). Note that formatting the camera’s internal memory or the memory card permanently deletes protected files (E72).
The Image Selection Screen When an image selection screen such as the one shown on Protect the right is displayed while operating the camera, follow the procedures described below to select the images. Back Use the multi selector JK to select an image. Protect Move the zoom control (A 1) toward g (i) to switch to full-frame playback or f (h) to switch to thumbnail...
Rotate Image Press the c button (playback mode) M d button M Rotate image M k button Specify the orientation in which saved images are displayed during playback. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. Select an image from the image selection screen (E52).
Voice Memo Press the c button (playback mode) M select an image M d button M Voice memo M k button Voice memos can be recorded and attached to images. Recording Voice Memos Press and hold the k button to record (up to about 20 seconds).
Deleting Voice Memos Press the l button while the screen described in “Playing Voice Memos” (E54) is displayed. When the confirmation dialog is displayed, use the multi File will be deleted. OK? selector HI to select Yes and press the k button. To delete a voice memo for a protected image, the Protect setting must first be disabled.
Page 154
Notes About Copying Images Only files in formats that this camera can record can be copied. Operation is not guaranteed with images captured with another make of camera or that have been modified on a computer. The Print order (E46) settings configured for images are not copied. Copied images or movies cannot be displayed in auto sort mode (E10).
Sequence Display Options Press the c button (playback mode) M d button M Sequence display options M k button Select the method used to display images in the sequence (E12). Option Description Displays each image in a sequence individually. Q Individual pictures F is displayed on the playback screen.
The Movie Menu Movie Options Enter shooting mode M d button M D menu icon M Movie options M k button Select the desired movie option to record. Select normal speed movie options to record at normal speed, or HS movie options (E59) to record in slow or fast motion.
The available options and frame rates vary depending on TV settings > Video mode setting in the setup menu (A 69). iFrame is a format supported by Apple Inc. iFrame files cannot be edited on this camera. When recording movies to the internal memory, recording may stop before the maximum movie length is reached.
Page 158
Playing Back Movies in Slow Motion and Fast Motion When recording at normal speed: Recording 10 s time Playback 10 s time When recording at i/X HS 720/2×: Movies are recorded at 2× normal speed. They are played back in slow motion at 2× slower speed. Recording 10 s time...
Autofocus Mode Enter shooting mode M d button M D menu icon M Autofocus mode M k button Set how the camera focuses in movie mode. Option Description Focus is locked when the b (e movie-record) button is pressed to start A Single AF recording.
The Setup Menu Welcome Screen d button M z menu icon M Welcome screen M k button Configure the welcome screen that is displayed when you turn on the camera. Option Description None (default setting) Does not display the welcome screen. COOLPIX Displays a welcome screen with the COOLPIX logo.
Time Zone and Date d button M z menu icon M Time zone and date M k button Set the camera clock. Option Description Select an item: Press the multi selector Date and time JK (changes between D, M, Y, hour, and minute).
Page 162
Select w Home time zone or x Travel Time zone destination and press the k button. Home time zone Travel destination The date and time displayed in the monitor changes depending on whether the home time zone or travel London, Casablanca destination is selected.
Monitor Settings d button M z menu icon M Monitor settings M k button Option Description Photo info Set whether or not to display information in the monitor. This setting determines whether or not the captured image is displayed Image review immediately after shooting.
Page 164
Shooting mode Playback mode 4 / 4 4 / 4 Framing 2 5 m 0 s 2 5 m 0 s 0 0 0 4 . J P G 0 0 0 4 . J P G 7 8 0 7 8 0 grid+auto info 1 5 / 1 1 / 2 0 1 3 1 5 : 3 0...
Print Date (Imprinting Date and Time) d button M z menu icon M Print date M k button The shooting date and time can be imprinted on the images when shooting, allowing the information to be printed even from printers that do not support date printing (E49). 15.11.2013 15.11.2013 Option...
Vibration Reduction d button M z menu icon M Vibration reduction M k button Set to reduce the effects of camera shake while shooting. Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting. Option Description g On (default setting) Vibration reduction is enabled.
Motion Detection d button M z menu icon M Motion detection M k button Enable motion detection to reduce the effects of subject movement and camera shake when shooting still images. Option Description Motion detection is enabled with some shooting modes or settings, when r is displayed on the shooting screen.
AF Assist d button M z menu icon M AF assist M k button Enable or disable the AF-assist illuminator which assists autofocus operation. Option Description The AF-assist illuminator automatically lights up when the subject is dimly lit. The illuminator has a range of about 2.0 m (6 ft 6 in.) at the maximum wide- a Auto angle position and about 1.1 m (3 ft 7 in.) at the maximum telephoto (default setting)
Sound Settings d button M z menu icon M Sound settings M k button Option Description When On (default setting) is selected, the camera produces one beep when operations are performed, two beeps when focus is acquired on the subject, Button sound and three beeps when an error occurs.
Format Memory/Format Card d button M z menu icon M Format memory/Format card M k button Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be recovered.
Language d button M z menu icon M Language M k button Select a language for display of camera menus and messages. TV Settings d button M z menu icon M TV settings M k button Adjust settings for connection to a TV. Option Description Select from NTSC and PAL.
Blink Warning d button M z menu icon M Blink warning M k button Select whether or not the camera detects human subjects that have blinked using face detection (A 54) when shooting in the following modes: G (easy auto) mode Portrait or Night portrait scene mode (A 30) Option Description...
Eye-Fi Upload d button M z menu icon M Eye-Fi upload M k button Select whether or not the camera’s Eye-Fi card (available from third-party manufacturers) sends images to your computer. Option Description Upload images created by the camera to a preselected b Enable (default setting) destination.
Reset All d button M z menu icon M Reset all M k button When Reset is selected, the camera’s settings are restored to their default values. Some settings, such as Time zone and date or Language, are not reset. Resetting File Numbering To reset file numbering to “0001”, delete all images saved in the internal memory or on the memory card (A 27) before selecting Reset all.
Option Description k Alkaline (default setting) LR6/L40 (AA-size) alkaline batteries l COOLPIX (Ni-MH) Nikon EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries m Lithium FR6/L91 (AA-size) lithium batteries Firmware Version d button M z menu icon M Firmware version M k button...
Error Messages Refer to the table below if an error message is displayed. Display Cause/Solution The inside of the camera has become hot. The camera will turn off The camera turns off automatically. Wait until the camera has – to prevent overheating. cooled before resuming use.
Page 177
Display Cause/Solution An error occurred while saving the image. Insert a new memory card or format the internal memory or memory card. The camera has run out of file numbers. Insert a new memory card or format the internal memory or Image cannot be saved.
Page 178
Backlighting in scene mode. A lens error occurred. Turn the camera off and then on again. If the error persists, Lens error contact your retailer or Nikon-authorized service representative. An error occurred while communicating with the printer. Communications error Turn the camera off and reconnect the USB cable.
Page 179
Turn the camera off, remove and reinsert the batteries, and System error 10, 18 turn the camera on. If the error persists, contact your retailer or Nikon-authorized service representative. Printer error: check After solving the problem, select Resume and press the –...
File Names Images, movies, or voice memos are assigned file names as follows. D S C N 00 0 1 . J P G Identifier Extension (not shown on camera monitor) (indicates file format) Original still images (voice Still images .JPG memo attachment included) DSCN...
Optional Accessories Rechargeable Ni-MH batteries EN-MH2-B2 (set of two EN-MH2 batteries)* Rechargeable battery Rechargeable Ni-MH batteries EN-MH2-B4 (set of four EN-MH2 batteries)* Battery Charger MH-72 (includes two EN-MH2 rechargeable Ni-MH batteries)* Battery charger Battery Charger MH-73 (includes four EN-MH2 rechargeable Ni-MH batteries)* AC Adapter EH-65A (connect as shown) AC adapter Make sure that the power connector cord has been properly aligned in...
Technical Notes and Index Caring for the Product........F2 The Camera....................F2 Batteries ......................F3 Memory Cards ..................F5 Cleaning and Storage........F6 Cleaning......................F6 Storage ......................F7 Troubleshooting..........F8 Specifications...........F16 Approved Memory Cards ..............F20 Index ..............F23...
Caring for the Product The Camera To ensure continued enjoyment of this Nikon product, observe the precautions described below in addition to the warnings in “For Your Safety” (A viii-xiv) when using or storing the device. Do Not Drop The product may malfunction if subjected to strong shock or vibration.
Images in the monitor may be difficult to see under bright lighting. The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your Nikon-authorized service representative. Batteries Be sure to read and follow the warnings in “For Your Safety” (A viii-xiv) before use.
Page 186
Charging Rechargeable Batteries Do not mix batteries with different amounts of charge remaining, or batteries of a different make or model. When using EN-MH2 batteries with this camera, charge two batteries at a time using Battery Charger MH-72. When using Battery Charger MH-73, charge two or four batteries at a time. Use only Battery Charger MH-72 or MH-73 to charge EN-MH2 batteries.
Remaining Battery Charge If you insert discharged batteries into the camera, the camera may indicate that the batteries have adequate charge remaining. This is a characteristic of batteries. Recycling Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations.
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Avoid touching glass parts with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that is pumped to produce a stream of air out the other end).
Storage Turn the camera off when not in use. Be sure that the power-on lamp is off before putting the camera away. Remove the batteries if the camera will not be used for an extended period. Do not store the camera with naphtha or camphor moth balls, or in any of the following locations: Next to equipment that produces strong electromagnetic fields, such as televisions or radios...
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Problem Cause/Solution Wait for recording to end. If the problem persists, turn the camera off.
Page 191
Problem Cause/Solution 69, E65 Adjust the monitor brightness. Monitor is hard to read. The monitor is dirty. Clean the monitor. If the camera clock has not been set, O flashes during shooting and movie recording. Images and movies saved before the clock is set are dated “00/ 00/0000 00:00”...
Page 192
Shooting Issues Problem Cause/Solution 71, 76, Cannot switch to shooting E22, Disconnect the HDMI cable or USB cable. mode. When the camera is in playback mode, press the 1, 26 A button or the shutter-release button. No image captured when When menus are displayed, press the d button.
Page 193
Problem Cause/Solution Bright specks appear in The flash is reflecting off particles in the air. Lower the images captured with flash. flash. The flash is lowered. 3, 41 A scene mode that restricts the flash is selected. 51, E44 On (BSS) is selected for Smile timer in the smart Flash does not fire.
Page 194
Problem Cause/Solution Images appear smeared. The lens is dirty. Clean the lens. 32, 51, Colors are unnatural. White balance or hue is not adjusted properly. The subject is dark, and the shutter speed is too slow Randomly spaced bright or ISO sensitivity is too high. Noise can be reduced by: pixels (“noise”) appear in Using the flash.
Page 195
Problem Cause/Solution It may take more time to save images in the following situations. When the noise reduction function is in operation, – such as when shooting in a dark environment When the flash mode is set to V (auto with red- Saving images takes time.
Page 196
– start when camera is Confirm system requirements. connected to a computer. The computer is not set to start Nikon Transfer 2 automatically. For more information about Nikon Transfer 2, refer to help information contained in ViewNX 2. The memory card contains no images. Replace the Images to be printed are not memory card.
Page 197
Problem Cause/Solution The camera cannot be used to select the paper size in the following situations, even when printing from a PictBridge-compatible printer. Use the printer to Cannot select paper size select the paper size. with camera. 71, E26, The printer does not support the paper sizes specified by the camera.
Specifications Nikon COOLPIX L620 Digital Camera Type Compact digital camera Number of effective pixels 18.1 million Image sensor -in. type CMOS; approx. 18.91 million total pixels Lens NIKKOR lens with 14× optical zoom 4.5–63.0 mm (angle of view equivalent to that of 25–350 mm lens...
Page 200
Flash Range (approx.) [W]: 0.5–5.0 m (1 ft 8 in.–16 ft) (ISO sensitivity: Auto) [T]: 1.0–3.0 m (3 ft 4 in.–9 ft 10 in.) Flash control TTL auto flash with monitor preflashes Interface Hi-Speed USB Data transfer protocol MTP, PTP Video output Can be selected from NTSC and PAL HDMI output...
Page 201
Individual movie files cannot exceed 4 GB in size or 29 minutes in length. Recording may end before this limit is reached if camera temperature becomes elevated. Specifications Nikon will not be held liable for any errors this manual may contain. The appearance of this product and its specifications are subject to change without notice.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
Page 203
AVC Patent Portfolio License This product is licensed under the AVC Patent Portfolio License for the personal and noncommercial use of a consumer to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC video.
Index Symbols g Telephoto............23 AC adapter ........... E83 f Wide-angle............ 23 AF area mode ........51, E42 i Playback zoom ..........59 AF-assist illuminator ....1, 69, E70 h Thumbnail playback....... 60 Album..............E9 G Easy auto mode......... 29 Alkaline batteries..........
Page 207
Museum l ..........30, 33 ISO sensitivity........51, E40 Night landscape j ........ 30, 32 JPG..............E82 Night portrait e........30, 31 Nikon Transfer 2 ........75, 76 Landscape c............30 Nostalgic sepia E ........... 35 Language ..........70, E73 Number of exposures remaining Lens..............
Page 211
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. CT3F01(11) 6MN28411-01...