Assembly
WARNING: This tool is heavy. To reduce the risk of
back injury, get help whenever you have to lift the
tool.
Assemble The Cabinet
1. From among the loose parts, find the following:
6
Machine Screws w/Washer Head
1
Cabinet Rear
1
Left Cabinet Side
1
Right Cabinet Side w/Switch Opening
2. Assemble the three sides of the cabinet as shown,
using the three lowest holes on each side of the cabi-
net rear.
NOTE: The front of the cabinet will be attached later.
Install the Leveling Feet
From the loose parts bag find the following:
4
Leveling Feet
4
Nut Hex 3/8-16
Install leveling feet as shown. Later when the jointer/
planer is completely assembled and put in its permanent
location in your workshop, you will need to level the cabi-
net.
Machine Screw w/Washer Head
3/16-24 x 3/8
Left Cabinet
Side
Right Cabinet Side
w/Switch Opening
Cabinet
˜
Leveling Foot
13
Washer
Head Screw
Cabinet Rear
3/8-16 Hex Nut