Related Manuals for Ryobi RED1520G
Summary of Contents for Ryobi RED1520G
- Page 1 RED1520G ELECTRIC EDGER OPERATOR’S MANUAL Important! It is essential that you read the instructions in this manual before operating this machine.
-
Page 2: Important Safety Instructions
Your edger has been engineered and manufactured of drugs, alcohol, or medication. Do not operate in poor lighting. to Ryobi’s high standard for dependability, ease of Follow instructions for the safe operation of the operation, and operator safety. When properly cared for, ... -
Page 3: Specific Safety Rules
ENGLISH Do not, under any circumstance, use any attachment cord away from heated surfaces. Do not unplug by pulling on the cord. To unplug, or accessory on this product which was not provided grasp the plug, not the cord. with the product, or identified as appropriate for use In a double insulated appliance, two systems of with this product in this operator's manual. - Page 4 ENGLISH Use this edger for edging along sidewalks, driveways, product. Do not attempt to remove cut material nor hold material to be cut when the motor is running or and flower beds. Do not use for any other purpose. Do not use the edger on or near graveled surfaces.
- Page 5 To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance.
- Page 6 ENGLISH ELECTRICAL 4.Powerhead pole 5.Edger guard 6.Adjusting knob DOUBLE INSULATION 7.Spring assist front wheel Double insulation is a concept in safety in electric power 8.Blade tools, which eliminates the need for the usual three 9.CleanEdge™ blower wire grounded power cord. All exposed metal parts are 10.Wheels isolated from the internal metal motor components with 11.Handle pole...
-
Page 7: Operation
ENGLISH Slide the handle pole into the lower powerhead pole LOCK-OFF BUTTON The lock-off button reduces the possibility of accidental end until you hear the button click. The tubes are egg- starting. shaped and will only install one way. Lower the collar on the handle pole end to the ... -
Page 8: Maintenance
ENGLISH STARTING AND STOPPING force the blade into the ground. Light contact of the blade against the sidewalk edge, See Figure 3 curb,etc., is acceptable and will not damage the To start the motor: edger. Connect the edger to the power supply. Best appearance is obtained when grass is dry. -
Page 9: Troubleshooting
ENGLISH REPLACING THE BLADE See Figures 7 - 8. NOTE: Always ask for replacement blade model number AC 45E. Replace blades that are damaged or worn. To increase blade life span, keep initial cutting depth at minimum and increase depth setting only as blade wears. Stop the motor and unplug the edger.