Table of Contents
Advertisement
Installation And
Operating Instructions
For Front Loading
Washers
Keep these instructions for future reference. Be sure this manual stays
with washer.
Attention Installer
Wait until washer is within 4 feet of installation area to
remove shipping brace and shock sleeve.
Shipping brace and shock sleeve must be removed
prior to operating machine.
Para recibir un manual en español gratis, envíe por correo o por fax su
nombre, dirección, y número de modelo a:
Amana Appliances
Consumer Communications/Spanish Manual
2800 220th Trail
Amana, Iowa 52204-0001
USA
Número de fax 1-319-522-8158
Advertisement
Table of Contents
Related Manuals for Amana Front Loading Washers
Summary of Contents for Amana Front Loading Washers
- Page 1 Para recibir un manual en español gratis, envíe por correo o por fax su nombre, dirección, y número de modelo a: Amana Appliances Consumer Communications/Spanish Manual 2800 220th Trail Amana, Iowa 52204-0001 Número de fax 1-319-522-8158...
-
Page 2: Table Of Contents
Adding Clothes During Wash Cycle ....11 Detergents ............11 Purchase replacement parts and additional accessories Spin Cycle ............11 over the phone. To order accessories for your Amana Operating Instructions ..........12 product, call 1-800-843-0304 inside U.S.A. or Determine Proper Cycle ........12 319-622-5511 outside U.S.A. - Page 3 15. Install the washer according to the Installation Instructions. All connections for water, drain, WARNING electrical power and grounding must comply with To reduce the risk of fire, electric shock, serious injury local codes and be made by licensed personnel or death to persons when using your washer, follow when required.
-
Page 4: Model Identification
• Bag for storing shipping materials out website www.aman.com. • Video Retain accessories bag to store shipping brace and When contacting Amana Appliances, provide product shock sleeve for future use when moving washer. information. Product information is on the serial plate. Record the following information. -
Page 5: Electrical Requirements
Installing Washer NOTE: Have a qualified electrician check the polarity of Electrical Requirements the wall receptacle. If a voltage reading is Washer requires 120 volt, 60 hertz and a 3-prong measured other than that illustrated, the qualified grounding plug. electrician should correct the problem. NOTE: Wiring diagram is located in the control hood. -
Page 6: Water Temperature
Installing Washer NOTE: Water supply faucets should be readily Risers accessible to permit turning them off when Risers (or air cushions) may have to be installed if the washer is not being used. pipes knock or pound when flow of water stops. The risers are more efficient when installed as close as possible to NOTE: Longer inlet hoses are available (optional at extra the water supply faucets. - Page 7 Installing Washer IMPORTANT: Thread hose couplings onto valve IMPORTANT: To prevent siphoning, do not place any connections finger-tight, then approximately ribbed portion of the drain hose into the turn with pliers. DO NOT cross thread or standpipe. overtighten couplings. Turn water on and check for leaks. If leaks are found, retighten the hose couplings.
- Page 8 Installing Washer NOTE: End of drain hose must be 24" to 36" above the 4. Remove Shock Sleeves and Shipping floor. Without 24" to 36" high elevation, water Brace may run out of washer prematurely. Remove 2 front access panel screws to remove access panel.
- Page 9 Installing Washer Remove both front shock sleeves and both rear Loosen inside locknuts using a " deep socket. shock sleeves by pulling on the yellow rope. Adjust level legs with a " socket on top of leg. Adjust legs until machine is level front to back, side to side and does not rock.
-
Page 10: Rough In Dimensions
Installing Washer 7. Check Installation Refer to Installer Check on back cover of this manual and make sure that washer is installed correctly. 8. Verify Washer Operation Push timer knob in and turn to RINSE & SPIN cycle to ensure washer is operating correctly. Close door and pull knob out to start the washer. -
Page 11: Operating Washer
Operating Washer Helpful Hints Adding Clothes During Wash Cycle To avoid delays to wash cycle make sure all items are There is no agitator on this washer. Instead, clothing placed in washer before starting washer. If it is necessary gently tumbles through water. Wash action consists of a to add or remove items from the washer while it is period of tumbling in one direction, a brief pause, then a operating, perform the following steps:... -
Page 12: Operating Instructions
Operating Washer Operating Instructions Permanent Press/Knit Cycle Use for permanent press items and synthetics. Wash WARNING time selection will depend upon type of fabric and amount To reduce the risk of fire, electrical shock, serious of soil. There are two settings in the PERMANENT injury or death to persons, read the IMPORTANT PRESS/KNITS cycle—Normal and Light. -
Page 13: Wash Cycles
Operating Washer Wash Cycles Each wash cycle includes several different settings. The following chart lists what can be expected during the cycles selected. Regular Cycle Activity Water Temperature Prewash (Optional) Fill, Tumble, Rinse & Drain Boosted Hot, Hot, Warm or Cold Heavy, Normal, Light Fill &... -
Page 14: Operating Procedures
Operating Washer Operating Procedures WARNING To reduce risk of serious injury, do not attempt to Caution bypass loading door switch permitting washer to tumble or spin with the loading door open. To prevent property damage or damaging washer verify the following before using the washer: 5. - Page 15 Operating Washer 6. Select “EXTRA RINSE” if desired. • Boosted Hot Sturdy whites and Extra Rinse control is useful for people with detergent colorfast items Approximately 140° F sensitive skin. By pressing the “Extra Rinse” to “ON”, • Work Clothes the Regular, Permanent Press/Knits, or Delicate •...
-
Page 16: Timer
High Efficiency (HE) powdered or liquid detergents are If this condition occurs, redistribute the load manually and recommended for use with front loading washers. repeat the cycle beginning at the last rinse. Powdered bleach can also be used in the dispenser along If the condition persists, consider steps discussed in the with the detergent. -
Page 17: Liquid Bleach Compartment
Operating Washer Fabric Softener Compartment The fabric softener compartment is located in the left rear corner of the dispenser drawer. A. Detergent compartment Detergent dispenser location A. Fabric softner dispenser Liquid Bleach Compartment Fabric softner dispenser location Bleach compartment is located in the left front corner of the dispenser drawer. -
Page 18: Care And Cleaning
Care and Cleaning Cold Weather Care 2. Place the shock sleeves on all four shock absorbers. If the washer is delivered on a cold day (below freezing), (See illustration) or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up to room temperature. -
Page 19: Before Calling Service
• Make sure washer is level. See “Installation for setting controls. Instructions” for leveling. • Drive belt may be broken. Call Amana technician. • Floor may not be strong enough for washer. See Installation Instructions for recommended type of floor. - Page 20 Amana Appliances • Make sure water inlet hoses are connected to correct 2800 220th Trail faucets and inlet connections. Amana, Iowa 52204-0001 • Make sure something in washload is not tangled Phone: 1-800-843-0304 preventing wash load from tumbling. Fax: (319) 622-2977 •...
-
Page 21: Common Washer Sounds
Care and Cleaning Common Washer Sounds 1. Accelerating Sound is heard during the spin portion of every cycle. Spin speed will increase and decrease during the spin cycle. The washer will reach the highest spin speed during the end of the cycle. -
Page 22: Warranty
For warranty service, contact an authorized Amana servicer. Should you have a service problem that is not resolved locally,... -
Page 24: Installer Checklist
• Plug in washer. See dispenser page 9. • Verify Washer operation. See page CPW13 0C • Select cycle according to type of fabric being washed. Pull out knob. See page 15. Part No. 686938 ©1998 Amana Appliances Printed in U.S.A. Amana, Iowa 52204...