Installation - CEN-TECH 66817 Owner's Manual & Safety Instructions

installation

Read the EntiRE impORtant SaFEtY inFORmatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO pREVEnt SERiOuS inJuRY FROm aCCiDEntal OpERatiOn:
make sure that the power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
CautiOn! This Inverter must only be connected
to batteries with a output voltage of 12 volts DC.
Lower voltage will not operate the Inverter properly,
and more voltage could damage the Inverter
or the device being powered. Do not use this
Inverter with positive ground electrical systems.
the inverter is configured to have a number of
shut-down points, for the safety of the operator,
the unit, and the devices being used with it.
• If the DC input voltage drops too low, the
alarm on the Inverter will sound. Should the
input voltage drop further, the Inverter will
shut down automatically to prevent permanent
battery damage. Recharge the battery soon.
• If the DC input voltage exceeds 15V the
Inverter will shut down automatically.
• If the output load power rises higher
than the rating power of the Inverter; the
unit may shut down automatically.
• The Inverter may automatically shut down
if its internal temperature gets too high.
note: Even though this inverter has built-in
mechanisms to minimize damage, the above
situations should be avoided because they
can still damage the inverter or battery.
Page 6 For technical questions, please call 1-800-444-3353.
Functions
Power Inverter
Power
Terminals
Fan
Power Button
Power LED
USB
Outlet
Ring
Terminals
Power
Outlets
Figure 1
Fault LED
Alligator Clips
Cable
Item 66817