Service Precautions - CEN-TECH 66817 Owner's Manual & Safety Instructions

Operation precautions (cont.)
5. Check for breakage of parts and any other
condition that may affect the Inverter's operation.
If damaged, have it repaired before use.
6. Do not attempt to power a device, or combination
of devices, that will require more than the
rated output of this inverter. This may damage
the inverter or the attached devices.
7. Appliances such as microwave ovens will
normally draw more than their rated current.
For example: A typical 600 watt microwave
oven will draw approximately 1,000 watts.

Service precautions

1. DO nOt OpEn hOuSinG.
Contains no user-serviceable parts.
internal parts may be electrified, even
with unit off and power disconnected.
2. Maintain labels and nameplates on the
Inverter. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
Alternating Current Supply
Page 4
SaVE thESE inStRuCtiOnS.
For technical questions, please call 1-800-444-3353.
8. Do not attach a battery charger if the charger
carries a warning that dangerous voltages
are present at the battery terminals.
9. Some fluorescent lamps may not operate
properly with this type of inverter. If the bulb
appears to be too bright, or fails to light,
do not use the lamp with this inverter.
10. Some fans with synchronous motors may slightly
increase in speed when powered by the inverter.
This is not harmful to the fan or to the inverter.
11. Inverter will consume some power while on, even
without loads attached. Turn inverter off after use.
3. have your inverter serviced by a qualified
repair person using only identical
replacement parts. this will ensure that
the safety of the inverter is maintained.
4. Fuses must be replaced with fuses of
the same type and rating only.
Direct Current Supply
a
Amperes
Ø
Phase
Equipment Grounding Conductor
Item 66817