Specifications; Accessories - Pioneer HTV-SW1 Service Manual

HTV-SW1, HTV-C1

SPECIFICATIONS

HTV-1
Amplifier Section
Continuous power output (DIN)
Front L/R ............................... 30 W + 30 W (1 kHz, THD 1%, 8Ω)
Subwoofer ...................................... 60 W (100 Hz, THD 1%, 8Ω)
Continuous power output (RMS)
Front L/R ............................. 40 W + 40 W (1 kHz, THD 10%, 8Ω)
Subwoofer .................................... 80 W (100 Hz, THD 10%, 8Ω)
Input (Sensitivity/Impedance)
INPUT 1, 2 ................................................................. 220 mV/70 kΩ
Speaker Section
Front L/R ............................................................... 8.7 cm cone type
Subwoofer ............................................................ 20 cm cone type
Miscellaneous
[Except Australian model]
Power Requirements ............................. AC 110-127/220-230/240 V
Power Consumption ............................................................. 400 W
In Standby Condition ................................................ less than 3 W
[Australian model]
Power Requirements ......................................... AC 240 V, 50/60 Hz
Power Consumption ............................................................. 350 W
In Standby Condition ................................................ less than 3 W
Dimensions
Control center .......................... 610 (W) × 110 (H) × 166 (D) mm
Powered subwoofer ................ 364 (W) × 360 (H) × 371 (D) mm
Weight (without package)
Control center .................................................................... 3.8 kg
Powered subwoofer ........................................................ 13.5 kg

Accessories

¶ Remote control unit
[Except Australian
[Australian model]
model] (CU-HT007)
(CU-HT008)
(AXD7186)
(AXD7191)
¶ Mount kit (AEA7021)
Washers x 2 Wing nuts x 2
(WB60FZK)
(NR60FZK)
Nuts x 2 (NA60FZK)
52
Furnished Parts
System cable A .............................................................................. 1
System cable B .............................................................................. 1
Audio cord ..................................................................................... 1
Mount kit ........................................................................................ 1
Dry Cell Batteries
Remote Control Unit ..................................................................... 1
Operating Instructions .................................................................. 1
Warranty card (Australian model only) ....................................... 1
NOTE:
Specifications and the design are subject to possible modifications without
notice, due to improvements.
(switchable), 50/60 Hz
¶ System cable A (3m)
¶ Batteries
(R6P, AA)
¶ System cable B (3m)
(VEM-013)
Bolts (S) x 2
(ABA7041)
Bolts (L) x 2
(ABA7042)
Except Australian model .......................... size "AA" IEC R6P x 2
Australian model ................................. size "AAA" IEC LR03 x 2
Manufactured under license from Dolby Laboratories.
DOLBY and the double-D symbol
Laboratories.
¶ Audio cord
(ADX7239)
¶ Operating instructions
¶ Warranty card
(ADE7023)
are trademarks of Dolby
(VDE1052) (L= 1.5 m)
White
Red
(Australian model only)
Bolt caps x 4
(AEB7111)
Velcro tapes
(hooks) x 2
(AED7028)
Velcro tapes
(loops) x 2
(AED7029)