Forehead Temperature Mode; Object Temperature Mode - Motorola MBP27T User Manual

3.5.1

Forehead Temperature Mode

• Always make sure the probe lens is clean and free of any
damage. The forehead should be dry and dirt free.
• Place the probe tip about 1 cm away from the middle forehead
of the baby (Fig. 1)
• Press and hold the Forehead Temperature button until you hear the beep and
the reading displays on the LCD screen.
Note:
a. Temperature Measurement Range: Forehead temperature
mode: 32~42.2°C (89.6~108°F). Normal body temperature range:
36.5~37.2°C (97.8~99°F).
b. Forehead temperature is displayed in oral mode. This mode converts the
forehead temperature to display its "oral-equivalent" value.
c. Before the measurement, please stay in a stable environment for
approximately 5 minutes. Avoid bathing or strenuous movement for at
least 30 minutes prior to taking the measurement. "Normal" body
temperature can vary from person to person and may change according
to time of day and body location. Drinking hot or cold drinks may change
the body temperature by one degree or more.
d. Remember to keep the forehead area clean and away from sweat while
taking the temperature.
3.5.2

Object Temperature Mode

Point the probe tip about 1 cm away from the liquid surface. Press and hold the
Liquid Temperature button towards the milk or bath tub water. The reading will
be displayed on the LCD screen.
Note:
a. Temperature Measurement Range: Object temperature mode:
-20~80°C (-7.6~176°F)
b. Application include temperature measurements for water, milk, cloth, skin
or other objects.
c. This mode shows the actual and unadjusted surface temperature which is
different from the body temperature.
Using the Baby Monitor
Figure 1
13