Fujitsu Primergy RX100 S3 Options Manual page 30

Installing a controller
Ê Please read the documentation supplied with the controller.
Ê If necessary, connect cables onto the controller.
Figure 13: Riser card holder with riser card 1
Figure 14: Riser card holder with riser card 2
Ê Remove the PCI slot's rear cover.
V
CAUTION!
Keep the rear cover of the PCI slot for future use. If you remove the
controller again and do not replace it with a new one, the rear cover
must be reinstalled to comply with EMC regulations and to satisfy
cooling requirements and fire protection measures.
30 Options Guide
Controller in the PCI slots
U41617-J-Z156-1-76