Rear Panel (Connections) - D-Link DNS-346 User Manual

D-Link DNS-346 USER'S MANUAL
Drive Eject Levers
Power Receptacle
Reset Button
COMPONENT
Drive Eject Levers
Reset Button
Power Receptacle
USB Connector
Gigabit Ethernet Port
Cooling Fans

Rear Panel (Connections)

DESCRIPTION
Use the provided levers to eject the SATA hard drives.
Press this button for more than 5 seconds to reset the unit to factory defaults.
Connect the 19V / 4.74A power supply to the receptacle.
1x USB 2.0 (Type A) connector. USB Host port for print server or USB UPS monitoring.
Use the Gigabit Ethernet Port to connect the DNS-346 to the local network.
The cooling fans are used to cool the hard drives and feature speed control. When the unit is first powered on the fans rotate at a low
speed and rotate at a high speed when the temperature rises above 49 °C.
Gigabit Ethernet Port
USB Connector
Cooling Fans
Page 7 of 85