DSM-G600 User's Manual
Rear Panel
Antenna
Connects to a wireless
network.
Dismount Button
Press to safely remove USB
drives from the DSM-G600.
D-Link Systems, Inc.
Reset Button
Pressing the reset button for 10 seconds with
a paper clip will restore the unit to the original
factory default settings. The button is inside
the hole to prevent an accidental reset.
LAN Port
Connects to your Ethernet network. The LAN
port supports Auto MDI/MDI-X, allowing you to
connect a straight-through or crossover cable.
USB 2.0 Ports
Use these ports to connect USB
2.0 drives. USB 1.1 drives may
also be connected but will be
limited to USB 1.1 speed.
Power Receptor
Receptor for the supplied
power adapter.
Hardware Overview
Fan/Vent
Fan to cool the internal
hard drive.
7