Configuration; Easy Search Utility - D-Link ShareCenter DNS-343 User Manual

When first powered on, during the initial boot sequence, the DNS-343 will wait to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address,
by default it will have a self-assigned auto IP address of 169.254.x.x. It is recommended to use the included D-Link Easy Search Utility when accessing and configuring the
DNS-343 for the first time. If you want to change the IP address before logging in or are unable to connect to the DNS-343 IP address, you can use the Easy Search Utility
provided on the product CD to locate the device on your network and make any needed changes.
Network Storage
The Easy Search Utility displays any DNS-343 devices
Device
it detects on the network here.
Refresh
Refreshes the device list.

Configuration

Click Configuration to access the Web based
configuration of the DNS-343.
Refresh
LAN
Configure the LAN Settings for the DNS-343 here.
Apply
Click Apply to save changes to the LAN Settings.
Drive Mapping
Volumes available for mapping are displayed here.
Available Drive
Choose an available drive letter. Click Connect to map
Letters
the selected volume. Click Disconnect to disconnect
the selected mapped volume.
About
Click About to view the software version of the Easy
Search Utility.
Exit
Click Exit to close the utility.
D-Link DNS-343 User Manual
Configuration

Easy Search Utility

12