Circuit Operation (Base Unit) - Panasonic KX-TG4732B Service Manual

4.4.

Circuit Operation (Base Unit)

General Description:
(BBIC, Flash Memory, EERROM) is a digital speech/signal processing system that implements all the functions of speech
compression, record and playback, and memory management required in a digital telephone answering machine.
The BBIC system is fully controlled by a host processor. The host processor provides activation and control of all that functions
as follows.
RF part
EEPROM IC611
4.4.1. BBIC (Base Band IC: IC501)
• Voice Message Recording/Play back
The BBIC system uses a proprietary speech compression technique to record and store voice message in Flash Memory.
An error correction algorithm is used to enable playback of these messages from the Flash Memory.
• DTMF Generator
When the DTMF data from the handset is received, the DTMF signal is output.
• Synthesized Voice (Pre-recorded message)
The BBIC implements synthesized Voice, utilizing the built in speech detector and a Flash Memory, which stored the vocabulary.
• Caller ID demodulation
The BBIC implements monitor and demodulate the FSK/DTMF signals that provide CID information from the Central Office.
• Digital Switching
The voice signal from telephone line is transmitted to the handset or the voice signal from the handset is transmitted to the
Telephone line, etc. They are determined by the signal path route operation of voice signal.
• Block Interface Circuit
RF part, LED, Key scan, Speaker, Telephone line.
4.4.2. Flash Memory (IC601)
Following information data is stored.
• Voice signal
ex: Pre-recorded Greeting message, Incoming message
4.4.3. EEPROM (IC611)
Following information data is stored.
• Settings
ex: message numbers, ID code, Flash Time, Tone/Pulse
DECT RF system
ADPCM
TDMA/TDD
Mod/Demod
ADPCM
PA/LNA
Host CPU
BBIC (IC501)
Keys/ LEDs/ Charge
Digital
Speech
Processor
Caller ID
Modem
Digital TAM System
Flash Memory IC601
11
KX-TG4732B/KX-TG4733B/KX-TG4734B/KX-TGA470B
TEL
Analog
Line
Front
Interface
End
&
Multi-
plexer