SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
Selecting the active cameo mode:
ENTER
Press the
key while displaying any multi-screen. The top left cameo will be
the initial active cameo.
The active cameo is indicated by flashing the camera number and its title.
To End Active Cameo mode:
The active cameo mode will stay active for about 15 seconds after the last key is
ENTER
pressed, or until the
mode will also stop immediately if a new multi-screen display is selected, or if the
operator switches between Live, Play, and Record mode.
Key functions during ACTIVE CAMEO mode:
Arrow keys
Camera keys
FREEZE
ZOOM
ZOOM
Notice that if the
switch full-screen to the camera displayed in the top left cameo.
Display formats are operating parameters, not menu selections, and so they
NOTE:
are saved in volatile memory and not in battery backed-up memory.
3.1.3
FULL-SCREEN DISPLAYS ON MONITOR-A
Fixed Full-screen display:
A full-screen display of any camera is selected on Monitor-A by pressing the
corresponding camera key.
Full-screen Sequence list:
There are independent sequences, which operate on Monitor-A and Monitor-B. Refer to the
AutoList™ feature below.
To start full screen sequencing on Monitor-A:
JVC PROFESSIONAL, IMAGING PRODUCTS
key is pressed again to exit the mode. Active cameo
KEY
Moves the active cameo around the multi-screen.
Selects a camera to display in the active cameo. The
active cameo will auto-advance to the next logical
Labeled
cameo on the right so the operator can easily enter
cameras in several cameos without using the arrow
1
9
(
to
)
keys.
Freezes the cameo.
key
Switches to a full-screen display of that camera. This
key
will cancel active cameo mode.
key is pressed with no active cameo selected, then the display will
FUNCTION
19