Yamaha XP1000 Service Manual page 12

XP1000/XP2500/XP3500
Rear Panel
IO1/4
6. Front Panel Assembly
(Time Required: about 4 min)
6-1 Remove the top cover. (See procedure 1.)
6-2 Remove the two (2) cord holders and disconnect the
connector from the DC circuit board. (
6-3 Remove the six (6) screws marked [440] and six (6)
screws marked [460]. The front panel assembly can
then be removed with the left and right rack angle.
(Photo. 3, 7)(Fig. 4, 5)
VR
DC
Top view
[460]
12
IO4/4
[310] [300] [310]
[300]: Pan Head Screw 2.6x6 MFZN2B3 (WE986400)
[310]: Bonding Tapping Screw-B 3.0x10 MFZN2B3 (WE878000)
[340]: Bonding Tapping Screw-B 3.0x10 MFZN2B3 (WE878000)
[350]: Flat Head Tapping Screw-B 3.0x8 MFZN2B3 (WF266800)
[360]: Hex. Locking Screw HFS-4S-B1W (V6706600)
(Photo. 1)
[440]
[440]: Bind Head Screw-B 4.0x8 MFZN2B3 (WE962000)
Front view
[460]: Bind Head Screw-S 4.0x10 MFZN2B3 (WE980400)
[360] [350]
[340]
(Fig. 3)
6-1.
6-2.
) 6-3. [440]
(Photo. 2)
Bottom view
(Photo. 3)
(Fig. 4)
IO3/4
IO4/4
1
6 [460] 6
DC
[440]
[460]