Advertisement
installing your batteries
Insert two AAA batteries, matching the polarity symbols (+ or -) marked inside.
Battery notes:
• Place the tab under batteries to assist with removing
batteries.
• Dispose of old batteries promptly and properly. Do
not burn or bury them.
• Use only fresh batteries of the required size and
recommended type.
• Do not use batteries of different capacities or
chemistries.
• If you do not plan to use your blood pressure monitor
for several weeks, remove the batteries. Batteries can
leak chemicals that may damage electronic parts.
maintaining your measurements
recalling measurements stored in memory
To view a history of User 1's records, press (user1).
To view a history of User 2's records, press (user2).
•
The most recent record (1) is shown first. Each new measurement is assigned to the first (1)
record. All other records are pushed back one digit (e.g., 2 becomes 3, and so on), and the last
Notes
record (60) is dropped from the list.
• Press the corresponding button again (user1 or user2 ) to see additional records.
• Press and hold the corresponding button to auto-advance to each subsequent record.
• The date and time of the measurement are shown with each record.
• Memory records are saved when battery power is depleted or when you replace batteries.
deleting measurement records from memory
You have the option of deleting your latest measurement record or your entire measurement
history. This is useful if measurements have not been accurately recorded and need to be
recorded again.
to delete the latest record:
1. Press user1 or user2 to recall the latest measurement record for User 1 or User 2.
2. Press and hold SET until the LCD shows "DEL ONE".
3. Press and hold SET to delete the latest recorded measurement for User 1 or User 2. After
you have confirmed deleting the latest record, the screen shows "DEL DONE."
4. If you decide to abort the delete action instead, press user1 twice,
to go back to the main screen.
to delete all records
1. Press user1 or user 2 to recall the latest measurement record for User 1 or User 2.
2. Press and hold SET until the LCD shows "DEL ONE".
3. Press user 1 to show the option of deleting your entire measurement history; the LCD
displays "DEL ALL".
4. Press and hold SET to delete all measurement records. After you have confirmed
deleting all records, the screen shows "DEL DONE."
If you decide to abort the delete action instead, press user 2 once,
to go back to the main screen.
63-1537
06A05
Printed in China
63-1537.indd 2
Problem
No power
Low Batteries
Error Message
Wrong
Settings
No User
Memory
• This device is intended for adult use only and for non-
invasive measuring and monitoring of arterial blood
pressure. It is not intended for use on extremities other
than the wrist or for functions other than obtaining a
blood pressure measurement.
• Do not confuse self-monitoring with self-diagnosis. This
unit allows you to monitor your blood pressure. Do not
begin or end medical treatment based solely on the
measurements of this device. Consult a physician for
treatment advice.
• If you are taking medication, consult your physician to
determine the most appropriate time to measure your
blood pressure. Never change a prescribed medication
without consulting your physician.
º
or press user2 once
• This unit is not suitable for continuous monitoring during
medical emergencies or operations.
• If the cuff pressure exceeds 40 kPa (300 mmHg), the unit
will automatically deflate. If it does not deflate when
pressure exceeds 40 kPa (300mmHg), detach the cuff from
the wrist and press the power button to stop inflation.
º
or press user 1 twice
This product is warranted by Innovation One against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from
Innovation One company-owned stores and authorizedInnovation One franchisees and dealers. For complete warranty details and exclusions, check with your local Innovation
One store.
Innovation One Customer Relations
For additional information:
350 N. Henderson St., Ft. Worth, TX 76102
www.lifewiseonline.com
troubleshooting
Symptom
Check this
Display is dim or will not light up.
Batteries are exhausted.
Batteries are inserted incorrectly.
Low Battery Icon appears on the display.
1. Err appears on the display.
1. A measurement error occurred.
2. Err1, 2 or 3 appears on the display.
2. The wrist cuff is not secure.
3. Err4 appears on the display.
3. The monitor detected motion while measuring.
4. Err5 appears on the display.
4. Pressure is over 300mmHg.
5. EEx or EExx appers on the display.
5. A calibration error occurred.
The clock was not set or reset after installing new
Date and time are incorrect.
batteries.
The measurement unit was not set or reset after
Measurement unit (kPa or mmHg) are
installing new batteries.
incorrect.
The memory was not saved after taking a
measurement.
Cannot find a record.
The record was stored to the wrong user memory.
safety precautions
• It is important to relax when taking your blood pressure. Rest for at
• Do not lean backward or bend your wrist inward while taking a
• Avoid talking or moving your fingers and hand. Rapid movements or
• If you have just eaten a large meal, wait at least an hour before
• Do not smoke or drink alcohol before taking your blood pressure.
• Do not measure your blood pressure if you are under stress.
• Wait at least 3 minutes between measurements.
• For a meaningful comparison, try to measure under similar
• To stop the measurement process at any time, press
• The unit automatically switches off one minute after taking a
• Diastolic blood (80-85mmHg) and Systolic blood (120-130mmHg)
limited one-year warranty
04/04
Remedy
Replace with new batteries.
Insert batteries correctly.
Replace the batteries.
1. Relax for a moment and then measure again.
2. Refasten the cuff and measure again.
3. Movement may affect the measurement. Relax
for a moment and then measure again.
4. Same as 3.
5. Retake the measurement. If the problem
persists, contact the retailer or our customer
service department for further assistance. Refer
to the warranty for contact information and
return instructions.
Reset the clock.
Reset the measurement unit.
Retake the measurement, Press user 1 or user 2
to save the corresponding user's memory.
Press user 1 to view User 1's record or press
user 2 to view User 2's record.
hints and tips
least 15 minutes before you begin.
measurement.
other activities may alter your reading.
taking your blood pressure.
conditions. For example, take daily measurements at approximately
the same time, on the same wrist, or as directed by a physician.
º
º
measurement. To save the battery life, press
as soon as you are
finished to turn off the unit.
is normal blood pressure. If your measurements falls outside the
range, consult your physician.
.
07/12/2005 11:33:17
Advertisement
