Intended Use; Getting Ready - Olympus CX22LED Instructions Manual

1

Intended use

This product has been designed to be used to observe magnified images of specimens in various routine work and
research applications.
Do not use this product for any purpose other than its intended use.
This product complies with the requirements of directive 98/79/EC concerning in vitro diagnostic
medical devices. CE marking means the conformity to the directive.
USA CAUTION:
Federal law restricts this device to sale by or on the order of an appropriately licensed healthcare practitioner.
2

Getting Ready

@
Fig. 1
Disconnect the AC adapter before
carrying or storing the microscope.
Fig. 2
1. A microscope is a precision instrument. Handle it with care and avoid
²
subjecting it to sudden or severe impact.
2. Do not use the microscope where it is subjected to direct sunlight,
high temperature and humidity, dust or vibrations. (For the operating
conditions, see chapter 7, "SPECIFICATIONS" on Page 15.)
3. Always use the tension adjustment ring to adjust the rotation tension of
the coarse adjustment knob.
4. Be sure to leave enough space around the AC adapter when installing
the microscope.
5. When carrying the microscope, first make sure that the AC adapter has
been disconnected and hold both sides around the hole of the arm as
shown in Fig. 1 and carry it carefully.
CAUTION
· To prevent damage, do not hold the microscope by the
stage 1 or observation tube 2.
Be sure to remove the specimen; otherwise, it may fall.
· Do not carry the microscope with the AC adapter connected
to prevent damage to the AC adapter or the microscope
by hitting the output connector of the AC adapter.
· Be sure to disconnect the AC adapter from the microscope
when storing the microscope after use.
CX22LED
2