L2Tp - D-Link DIR-615 User Manual
Wireless n router
Hide thumbs
Also See for DIR-615:
- User manual (208 pages) ,
- Quick installation manual (44 pages) ,
- Training manual (37 pages)
Table of Contents
Advertisement
Section - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a
username and password. This option is typically used for DSL services.
Address Mode:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS
server addresses. In most cases, select
Dynamic.
L2TP IP Address:
Enter the L2TP IP address supplied by your
ISP (Static only).
L2TP Subnet Mask:
Enter the Subnet Mask supplied by your ISP
(Static only).
L2TP Gateway:
Enter the Gateway IP Address provided by
your ISP.
L2TP Server IP:
Enter the Server IP provided by your ISP
(optional).
Username:
Enter your L2TP username.
Password:
Enter your L2TP password and then retype
the password in the next box.
Select either Always-on, On-Demand, or
Reconnect Mode:
Manual.
Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature,
enable Auto-reconnect.
DNS Servers:
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
D-Link DIR-615 User Manual
L2TP
5
Advertisement
Table of Contents
