Chassis Intrusion Switch Connector: Jcase1; Power Saving Switch Connector: Jgs1 - MSI MS-9105 User Manual

Chapter 2

Chassis Intrusion Switch Connector: JCASE1

This connector is connected to a 2-pin chassis switch. If the chassis is
opened, the switch will be short. The system will record this status and show
a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.

Power Saving Switch Connector: JGS1

Attach a power saving switch to this connector. Pressing the switch
once will have the system enter the sleep/suspend state. Press any key to
wake up the system.
2-18
JCASE1
JGS1