MSI ATX BX7 User Manual page 46

Micro atx bx7 mainboard

Hide thumbs Also See for ATX BX7:

Table of Contents

The mainboard supports three kinds of system boot up: the Boot-Up by

switch, Immediate Boot-Up, and Last State. With the Boot-Up by Switch, the

system will boot up only when the power on switch is pressed. For

Immediate Boot-Up, the system will boot up instantly when the power

connector is connected into the system; this function must be set in the

BIOS Power Management. For Last State, this will record the last status the

system was in: either System on or Shut down. The next time you boot up,

the system will remember the last status. This function must be set at the

BIOS Power Management Setup.

JP1

Table 2.20: Power On Mode Feature

JP1

Note: Short JP1, when using Boot-Up by Switch feature. Open JP1, to enable

Immediate Boot-Up or Last State.

Feature

Select Boot-Up by Switch

Select Immediate Boot-Up/

Select Last State

2-41

Table of Contents

Show Quick Links

Table of Contents

Ms-6147