Connecting The Phone System - Fortinet FortiVoice Quick Start Manual

Connecting the Phone System

If your phone system has been exposed to low temperatures prior to installation, wait
until the system has reached room temperature before connecting the power to avoid
damage due to condensation.
IMPORTANT: See installation instructions before connecting to the supply.
Visit docs.fortinet.com
Connecting to a LAN
Connect one end of the provided RJ-45 Ethernet cable to the LAN port at the back of
the unit and the other end directly to your network (i.e. Ethernet switch, router, etc.).
Ensure your computer is connected on the same network.
Powering up the system
Connect the provided AC adapter to the power port at the back of the unit and plug the
adapter into a surge-protected power outlet.
Never use an AC adapter other than the one provided with the unit. For
safe operation, connect a ground cable to the screw post on the back of
the phone system (
an outlet.
Fortinet Technologies Inc.
for the FortiVoice Hardware Specification
) and the other end to the screw of the face plate of
3 FortiVoice QuickStart Guide 7.30
Guide.