Nikon COOLPIX 56300 Quick Start Manual page 243

Troubleshooting
Problem
Images are too bright
(overexposed).
Unexpected results when
flash set to V (auto with
red-eye reduction).
Skin tones are not
softened.
Saving images takes time.
A ring-shaped belt or
rainbow-colored stripe
appears in the monitor or
images.
F10
Cause/Solution
Adjust exposure compensation.
When taking pictures with V (auto with red-eye
reduction) or fill flash with slow sync and red-eye
reduction in Night portrait scene mode, In-Camera
Red Eye Fix may be applied to areas not affected by
red-eye in rare cases. Use any scene mode other than
Night portrait, and change the flash mode to any
setting other than V (auto with red-eye reduction)
and try taking a picture again.
• In some shooting conditions, facial skin tones
may not be softened.
• Use Skin softening in the playback menu for
images containing four or more faces.
It may take more time to save images in the
following situations.
• When the noise reduction function is in
operation, such as when shooting in a dark
environment.
• When the flash mode is set to V (auto with
red-eye reduction).
• When shooting in Night landscape, Night
portrait, or Backlighting (when HDR is set to
On) scene mode
• When the skin softening function is applied
while shooting.
• When using continuous shooting mode
When shooting with backlighting or when a very
strong light source (such as sunlight) is in the
frame, a ring-shaped belt or rainbow-colored
stripe (ghosting) may occur. Change the position
of the light source, or frame the picture so that the
light source does not enter the frame and try
again.
A
66
43, 62
54
79, E19
–
63
43, 45, 47
42, 43, 56
39, E38
–