Error! Style not defined. Error! Style not defined.
4.9
Speaker
Removing the Speaker
Remove the Speaker according to the following procedures and Figure 4.18.
1.
Remove two M2.5x7.7 screws as shown in Figure 4.18.
2.
Detach the speaker cable and remove the speaker from the motherboard.
Installing the Speaker
Install the speaker according to the following procedures.
1.
Seat the speaker in the correct position on the motherboard.
2.
Secure the speaker with two M2.5x7.7 screws.
3.
Attach the speaker cable to the motherboard.
NB200 Maintenance Manual
Figure 4.18 Removing the speaker
4 Replacement Procedures
M2.5x7.7*2
4-27