Powering Your Portable Tv; Using Ac To Dc Adapter; Using Built-In Battery - Accurian 16-454 User Manual

Powering your Portable TV

External Power Source
Connect one of the provided adapters to the DC input
jack on the right side of the portable TV, then connect
it to the power source.
CAUTION!
• To avoid injury, do not connect the provided AC power adapter to a ceiling
outlet.
• Using an adapter that was not included may not meet the TV's specifications
and could damage the TV or the adapter.
• Its center tip must be set to positive and its plug must fit the portable TV's DC
9V jack. The supplied AC adapter meets these specifications.
• Do not leave the adapter plugged into the AC outlet or connected to the TV
when you are not using it.
• The adapter might become warm after extended periods of use.
Built-in Battery
CHARGE BATTERY BEFORE USE: Charge the built-in rechargeable Lithium-Polymer
battery for at least 8 hours before using the TV for the first time.
Note: Picture quality may become unstable and sound may weaken when battery power is
low. Recharge your unit or switch to AC power supply.
1. Turn off the TV. The Battery will not charge if the TV is on.
2. Connect the AC adapter to the DC jack and a standard wall outlet. The red charge
indicator will light. When fully recharged, the light will turn off.
Note: The Battery will not charge with the car power adapter.
3. Disconnect the AC adapter to stop charging.
Note: The TV can operate 100 minutes with the built-in battery. When the sound
level lowers or the picture becomes unstable, charge the battery about 4 hours.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a power supply not in the U.S.A., use an attachment plug adapter of
the proper configuration for the power outlet.
4