74388pr-0921.qrk
7/13/01
5
Steering Wheel
• Fit the steering wheel cap into the center of the steering
wheel with the screw holes aligned in the steering wheel
cap and the steering wheel.
• Insert two #8 x 1" screws through the holes in the
steering wheel cap and into the steering wheel.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
6
Cap Nut
Bottom View
• Position the vehicle body on its side.
• Fit a cap nut onto the end of the steering column.
• While supporting the steering column tap the cap nut
with a hammer to secure it on the steering column.
• Turn the vehicle body upright.
7
Tab
Activity Panel
Label 22
Gear
• Using safety scissors, separate the activity panel and
the instrument panel. Dispose of the plastic connector.
• Apply labels 20 and 26 to the radio dial.
• From the back of the activity panel: fit one end of the
radio dial onto a tab on the activity panel; position the
center gear in the slot; and then press firmly to snap in
the other end of the radio dial to the other tab on the
activity panel.
1:38 PM
Page 10
Assembly
Steering Wheel Cap
Slot
Tab
Radio Dial
Label 21
Radio Knobs
8
Activity
Panel
• From the front of the activity panel, insert and "snap" the
radio knobs.
• With the wide part of the shifter handle outward, insert
and snap the shifter into the activity panel.
• Set the activity panel aside.
9
Instrument
Panel
• Insert and "snap" the key assembly into the hole in the
instrument panel.
10
Tab
Notches
• Fit the tabs on the bottom of the instrument panel into
the notches in the dash opening to the left of the
steering wheel.
• Press near the top of the instrument panel to snap
the top tab on the back of the instrument panel into
the dash.
10
Shifter
Key
Assembly
Instrument
Panel
Tab