Table of Contents
Advertisement
AC-Input Power Supply Guidelines
To connect the AC power:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Page 54
Locate the AC power cord that was shipped with the AC/DC unit. Verify that the cord
meets your regional requirements. Do not use power cords that do not meet these
standards.
Plug the AC power cord into the receptacle at the rear of the chassis.
Engage the power cord retainer by lowering the retainer bracket toward from the
power cord and snap the bracket in place.
Plug the other end of the power cord into a 3-terminal, single-phase power source that
provides power within the acceptable range (100-240 VAC, 50/60 Hz, 12.0 ~ 6.0 A).
Turn the power switch on the rear panel to the ON position.
Check the front panel Status and Power Supply # 1 LED.
7450 ESS-1
Advertisement
Table of Contents
