15. Install the new motor (75).
16. Apply high–quality bearing grease to the gear (51)
until the area contains a total of 4 ounces (112
grams) of grease. Be sure the balls (9) are in
place.
17. Place the bronze-colored washer (67b) and then
the silver-colored washer (67a) on the shaft which
protrudes from the big gear in the drive housing
(67).
18. Align the gears and push the drive housing (67)
straight on to the front of the motor and the locat-
ing pins.
67
99
Fig. 27
Motor Replacement
20
73
8
9
67a
51
67b
9
11
10
70
20
26
40
19. Continue to reassemble the sprayer. Rotate the
conduit (1) as you feed wires through the conduit.
Install the seal (29) around the wires in the elbow
(345) of the pressure control. The seal keeps con-
taminants from entering the conduit and the motor.
See Fig. 26.
Fig. 26
34
59
16
29
345
01232
31
13
26
36
63
75
345
1