5. Plug in the sprayer. Turn off the switch (B). Plug
the power cord into a grounded electrical outlet.
6. Flush the pump to remove the oil which was left in
the pump to protect it during shipment. Follow the
flushing procedure on page 15.
100
E
D
Fig. 2
Setup
66
101
102
7. Prepare the paint according to the manufacturer's
recommendations. Remove the skin which may
have formed on top of the paint. Stir the paint thor-
oughly. Strain the paint through a fine, nylon, mesh
bag to remove particles that could clog the filter or
the spray tip.
74
66b
72
B
C
75