Assembling Your Tower Fan - Sunbeam FA7450 Instruction Booklet

Assembling Your Tower Fan

1.Locate the two halves of the base.
2.Remove the two butterfly screws from
underneath the tower section of the fan
and set aside.
3.Feed the power cord between the two
halves of the base. See Figure 1.
Figure 1
4.Clip the two halves of the base together,
ensuring the cord remains within the
channel formed when the two halves come
together.
5.Place the two butterfly screws back into
the holes they were removed from and
firmly fasten. See Figure 2.
Figure 2
6.Feed the power cord through the two
guides on the bottom of the base; the cord
will then come out through the outer rim.
7.Insert the 4 silicon feet provided into the
holes under the base.
8.Stand the fan upright, it is now ready for
use. See Figure 3.
Figure 3
5