Table of Contents
Advertisement
REMOVING CAVITY THERMOSTAT #
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug microwave oven or disconnect
power.
2.
Remove the microwave oven from its
mounting location (see page 2-4 for the
procedure and do procedure in reverse).
3.
Remove the cabinet from the oven (see
page 4-4 for the procedure).
Cavity Thermostat #3 and Humidity Sensor
4.
To remove cavity thermostat #:
a) Disconnect the wires from the thermo-
stat terminals (see the top-right photo).
b) Press down on the two holder locking
tabs, rotate the thermostat counter-
clockwise until it is free of the catches,
and remove the thermostat.
AND THE HUMIDITY SENSOR
Cavity Thermostat #3
5.
To remove the humidity sensor:
a) Remove the four screws from the cavity
thermostat and humidity sensor holder.
4 Cavity Thermostat and
Humidity Sensor Holder Screws
Continued on the next page.
4-
2 BU
BU
Locking Tabs
Advertisement
Table of Contents
