Microwave Oven Control - KitchenAid KAC-48 Technical Education

MICROWAVE OVEN CONTROL

SENSOR
AUTO
ENTER
COOK
QTY TURN TABLE OFF LBS OZ
DISPLAY
When power is first supplied to the microwave
oven, a ":" will blink in the display. Touch OFF
(Cancel OFF) to stop the blinking. If the ":"
blinks in the display at any other time, a power
failure has occurred. Touch OFF and reset the
clock if needed.
If "RETRY" blinks in the display for 1 second,
an invalid value has been entered. Retry your
entry.
REHEAT
DEFROST
1 2 3
TIMER WARM
POWER
START?
When the microwave oven is in use, the dis-
play shows cooking power, quantities, weights
and/or prompts. When the microwave oven is
not in use, the display shows the time of day
or Timer countdown.
START
The START control starts any function. If non-
sensor cooking is interrupted, touching START
will resume the preset cycle.
Add a Minute
The Add a Minute control automatically starts
the microwave oven at 100% power for 1
minute, and adds 1 minute of cook time up to
10 minutes, with each additional touch of the
control.
Touching Add a Minute during a cook cycle
will add 1 minute of cook time at the current
cook power.
OFF
The OFF control (Cancel OFF) clears any incor-
rect command and cancels all functions except
for the Demo Mode. It will not erase the time
of day. The control panel can be locked and
unlocked using the OFF control (see "Control
Lock" section).
The microwave oven will also turn off when
the door is opened. Close the door and touch
START to resume the cycle. A sensor cooking
cycle may not be resumed if interrupted by
opening the door.
Clock
This is a standard 12-hour clock (12:00-
11:59) and does not show a.m. or p.m.
To Set:
The microwave oven and timer must be off.
Touch Clock.
1.
2. Touch the number pads to set the time of
day.
3. Touch Clock or START.
3-