Adjusting The Live Contrast; Selecting The Visual Eq Mode (Factory's Setting); Adjusting Brightness; Adjusting Colour Of Picture - Alpine INE-S920E Owner's Manual

01GB00INE-S920E.book Page 40 Tuesday, June 12, 2012 10:56 AM

Adjusting the Live Contrast

This function automatically adjusts the areas on the screen that are too
bright or too dark and corrects them to natural brightness.
Setting item: Live Contrast
Setting contents: OFF (Initial setting) / LOW / HIGH
Selecting the Visual EQ Mode (Factory's
setting)
You can select a mode suitable for the subject image.
Setting item: Visual EQ
Setting contents: OFF (Initial setting) / NIGHT M. / SOFT /
SHARP / CONTRAST
OFF: Initial Setting
NIGHT M.: Suitable for movies in which dark scenes
frequently appear.
SOFT: Suitable for CGs and animated films.
SHARP: Suitable for old movies where images are not
clearly shown.
CONTRAST: Suitable for recent movies.
• To return to the default video settings, set this function to OFF. Any
Visual EQ selection or changes made are reset their initial settings.

Adjusting Brightness

Setting item: Bright
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.

Adjusting Colour of Picture

Setting item: Colour
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the colour between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.

Adjusting Tint of Picture

Setting item: Tint
Setting content: R15 to G15 (Initial setting: 0)
Adjust the colour from R15 to G15.
• When setting PAL, you can not adjust the TINT.

Adjusting Image Contrast

Setting item: Contrast
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the contrast between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
40
-EN
01GB04INE-S920E.fm

Adjusting Picture Quality

Setting item: Sharp
Setting content: -5 to +5 (Initial setting: 0)
Picture quality adjustment range is -5 to +5. "SOFT" and "HARD"
appear as the minimum and maximum values specified.
Saving and calling the adjusted picture
quality
When adjusting audio (video media), you can store the settings made
for "Adjusting Live Contrast, Brightness, Color, Tint, Contrast and
Sharp."
Setting item: Preset1 / Preset2
1 After completing "Adjusting Live Contrast, Brightness,
Color, Tint, Contrast and Sharp" (page 40), touch and
hold [Preset1] or [Preset2] to save the settings.
2 Touch [Preset1] or [Preset2] to call the saved settings.
• Display Mode cannot be registered.

About INE-S920E/INE-Z928E

Touch [About] on the General setup menu in step 3. Refer to "General
Setup Operation" (page 37).

Displaying the Product Information

You can view the version information of this product. Make note of this
information and refer to it whenever you contact Alpine Tech Support or
an Alpine-authorised dealer.
Setting item: Version Info
Contents: Serial No. / Firmware Version
®
Checking the DivX Registration
This unit will display the registration code required to play a DivX
VOD (Video On Demand), or you can also display the deregistration
code.
Setting item: Warranty / Copyright Info.
Displaying the Registration Code
1
Touch [Warranty/Copyright Info.].
2
Touch [DivX(R) VOD].
3
Touch [Registration].
The registration code is displayed on the screen.
4
Touch [OK].
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
®