Setting Parameters; Control Setting - Fujitsu WOxK112LCT Design & Technical Manual

2-33

CONTROL SETTING

GENERAL
„ „
The settings described below are those which can
be modified by the user.
We wish to remind you that changing the settings
below may cause the heat pump to behave in an
undesirable way. A testing period should be
conducted before the permanent settings of the
heat pump are confirmed. This may require a
number of changes to be made by the installer.

SETTING PARAMETERS

„ „
-Choose the desired level.
-Scroll the menu list.
-Choose the desired menu.
-Scroll the function lines.
-Choose the desired line.
-Adjust the parameter.
-Check the setting by pressing OK.
-To return the menu, press ESC.
If no setting is made for 8 minutes, the screen returns automatically to the basic display.
OK
Basic
Brief press
display
Press for
3 seconds
End user
Time of day and date
Operator section
Time prg heating circuit 1
End user Commissioning
Time of day and date
Operator section
Time prg heating circuit 1
- (CS01 - 09) - - (CS01 - 09) -
There are 3 access levels:
U: end-user level
I: commissioning level (installer start-up)
S: engineer level (specialist)
OK
Hours / minutes 1
Day / month 2
Year 3
Engineer
Hours / minutes 1
Day / Month 2
Year 3
Start of summertime 4
End of summertime 5
OK OK
Hours 1...24 h
Minutes 0...60 min
01.01...31.12
Control system