Dell Latitude C540 Service Manual page 41

Palm Rest: Dell Latitude C540/C640 Service Manual
1 M2.5 x 12-mm screws
(3)
2 M2 x 3-mm screws (2)
3 hard-drive bay door
5. Remove the two M2 x 3-mm screws that are located in the hard-drive bay door
labeled "circle P."
6. Turn the computer over, and remove the three M2 x 3-mm screws that secure
the palm rest to the bottom case:
a. Remove the two M2 x 3-mm screws that are located on the back edge of
the bottom case, underneath the display assembly.
b. Remove the M2 x 3-mm screw located near the right side of the bottom
case, next to the microprocessor thermal cooling assembly and opposite
the S-video TV-out connector.
7. Pull up on the pull-tab that is attached to the palm-rest flex cable connector to
remove it from the interface connector on the system board.
file:///F|/Service%20Manuals/Dell/Latitude/c540-640/palmrest.htm (2 of 4) [2/28/2004 7:57:52 AM]