Service Jig; Adjustment Mode; Adjustment Mode Menu (Menu No. 00~62); Operation Procedures In Adjustment Mode - Kenwood TS-590S Service Manual

TS-590S

Service Jig

■ ACC 2 connector short plug
Use the same adjustment jig as the TS-570.
■ How to use the ACC 2 connector short plug
Insert the adjustment jig into the ACC 2 connector lo-
cated on the rear panel of the transceiver.

Adjustment Mode

■ Outline
1. You can adjust the transceiver in service adjustment
mode (adjustment using the panel keys) or with manual
adjustment (turning a coil and trimmer, etc). The service
adjustment mode (hereinafter referred to as "adjust-
ment mode") has 63 items (Menu No. 00 to 62) and all
adjustment data is stored in the EEPROM (X53-446 A/3:
IC309).
2. You can enter adjustment mode and change each setting
data.
3. New data is written to the EEPROM by performing
Menu No. 60 writing.

■ Operation procedures in adjustment mode

1. How to start the adjustment mode
• Insert the adjustment jig into the ACC 2 connector lo-
cated on the rear panel of the transceiver.
• Turn the transceiver ON while pressing the [MIC] key
and [NR] key, to enter adjustment mode and the Menu
No. appears on the Memory channel number display.
Remove the adjustment jig from the transceiver when
the Menu No. appears.
68
ADJUSTMENT
2. Select the adjustment mode Menu No.
Turn the [MULTI/CH] knob to change the Menu No.
3. Change the adjustment mode setting data
Setting data can be changed using the [
4. Write the adjustment mode data
Press the [
[DWN] key on the microphone on Menu No. 60.
5. Cancel the adjustment mode
Press the [CLR] key to return to normal VFO mode.
Note: When the power is turned OFF during the adjustment
mode, adjustment mode is canceled.

■ Adjustment Mode Menu (Menu No. 00~62)

Adjustment
No.
00
01 CAR Point
02
03 HF 11M IF Gain
04 HF 73M IF Gain
05 11M Mix BAL
06 73M Mix BAL
07 AGC Reference
08
09 HF S-Meter
10
11
HF FM S-Meter
12
13
HF FM Squelch
14
15 50M IF Gain
16
17 50M S-Meter
18
19
50M FM S-Meter
20
21
50M FM Squelch
22
23 ALC Reference
24
POC/
25
Power Meter
26
Menu No.
] or [ ] key on the main unit or the [UP] or
Display
Frequency
Item
(MHz)
10M 2.7k 1.81
11M 2.7k 1.81
11M 500H 1.81
HF11 GAIN 14.2
HF73 GAIN 14.2
HF11 BAL 0.136
HF73 BAL 0.100
AGC REF 14.2
HF.SSB S1
HF.SSB S9 14.2
HF.SSB SF
HF.FM. S1
29.2
HF.FM.SFUL
HF.FM.SQ.TH
29.2
HF.FM.SQ.TI
50. GAIN 50.2
50.SSB S1
50.SSB S9 50.2
50.SSB SF
50.FM S1
50.2
50.FMSFUL
50.FM.SQ.TH
50.2
50.FM.SQ.TI
ALC REF 14.1
POC 100W 14.1
P.MTR 100W 14.1
50M 100W 50.1
] or [ ] key.
Condition
RX IF
Mode
(MHz)
73 USB
11 USB
11 CW
11 USB
73 USB
11 USB
73 USB
73 USB
11 USB
73 FM
73 FM
73 USB
73 USB
73 FM
73 FM
73 USB
73 CW