Front Panel Indicators - JBL Simply Cinema ECS300 Setup Manual

6. Surround
Press (+) on the remote con-
trol to increase the relative
volume of the surround chan-
nels. Press (–) on the remote
control to decrease the rela-
tive volume of the surround
channels.
7. Balance
Press (R) on the remote con-
trol to decrease the volume
of the left channel. Press (L)
on the remote control to
decrease the volume of the
right channel.
15/16

Front Panel Indicators

17–18. Input
Either Video or Aux will illu-
minate, depending on which
input is chosen.
19–23. Surround
One of these will illuminate
depending on which surround
mode is chosen.
8. Treble
Press (+) to increase the level
of high-frequency information.
Press (–) to decrease the level
of high-frequency information.
9. Bass
Press (+) to increase the level
of low-frequency information.
Press (–) to decrease the level
of low-frequency information.
17 18 20 19
Pro Logic
AUX
Phantom
VIDEO
Simulated
INPUT SURROUND MODE
10
24. Status Bar Indicators
These LEDs show the relative
setting of volume, balance,
center level, surround level,
bass and treble controls
(see "Status Bar Indicators"
section).
25. On
This will illuminate when
the Master On/Off is switched
to On/Standby and a signal
is present.
21 22 23
3 Stereo
Stereo
VOLUME
10–14. Surround Modes
From the remote, press one
of these buttons to directly
choose the desired surround
mode (see "Surround Modes"
section). From the front
panel, press (Surround Mode)
to cycle between the surround
modes.
15–16. Input Selector
From the remote, press either
(Aux) or (Video) to select the
desired input. From the front
panel, press (Input) to select
the desired input.
24 25
ON
STANDBY
MUTE
4
26. Standby
This will illuminate when the
Master On/Off is switched to
On/Standby and a signal is
not present.
27. Mute Symbol
This will flash whenever the
Mute feature is engaged.
26
27
1