Siemens S55 User Manual page 123

S55 Am.Eng., No Ref. No. (only PDF) (24. June 2002, 15:39)
Question
Message cannot
be sent.
EMS pictures&sounds
are not displayed at
the destination phone
No Internet access
possible.
PIN error/
PIN2 error.
Phone code error.
Service provider code
error.
Too few/too many
menu entries.
No fax possible.
Charge counter does
not work.
Damage
Severe shock.
Phone became wet.
Reset settings to the factory default (see also p. 91):
Questions&Answers
Possible causes
Some service providers do not
support this service.
Phone number of the service centre
is not set or is wrong.
SIM card contract does not support
this service.
Service centre overloaded.
Addressee does not have a compati-
ble phone.
The destination phone does not sup-
port the EMS standard.
Wrong WAP profile set or settings
wrong, incomplete.
Three wrong entries.
Three wrong entries.
No authorisation for this service.
Functions may have been added or
removed by your service provider via
the SIM card.
Incorrect settings in the PC.
No authorisation for this service.
Charge pulse not transmitted.
Remove battery and SIM and insert them again. Do not dismantle phone!
Remove battery and SIM card. Dry immediately with cloth, do not heat. Dry con-
nector contacts thoroughly. Stand unit upright in an air current. Do not dismantle
phone!
Possible solution
Check with your service provider.
Set service centre (p. 60).
Contact your service provider.
Repeat message.
Check.
Check settings, if necessary consult your
service provider.
Enter the PUK (MASTER PIN) provided
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, contact your service provider.
Contact Siemens Service (p. 124).
Contact your service provider.
Check with your service provider.
Check settings (p. 96).
Contact your service provider.
Contact your service provider.
A
*
# 9 9 9 9 #
123