Stop Watch - Binatone Smart 66 User Manual

Android smart home phone
Table of Contents

Advertisement

23.10 Count Down Timer
You can set a time period and start a countdown that produces an alarm tone when it
reaches zero.
1. Tap > Clock >
2. Enter the duration required.
Tap START to start the countdown.
Tap STOP to pause the countdown.
Tap
to discard the countdown.
+
Tap
to add another countdown when one timer is set or running.
Tap
to label the countdown.
.Tap +1M to add another minute to the timer.
When the countdown reaches zero, the alarm will sound, although the counter
will continue and show a negative time. Tap STOP to halt the alarm and the
timer. Tap

23.11 Stop Watch

You can run a stopwatch function, with interval timings.
Tap > Clock >
Tap START to start the timer.
Tap STOP to pause the timer.
Tap
to reset the timer.
Tap
to send the elapsed time by email or bluetooth.
Tip
While the timer is running, tap
but leave the timer running.
23.12 Night Mode Setting
The clock screen can be put into a night mode setting, where the illumination is
reduced to a more acceptable level for use in a dark room, such as a bedroom at
night.
Note: the handset display will still turn off after the set display sleep time, if it is not
connected to the charger.
Tap > Clock > > Night mode
Note: While in Night mode, tap the screen to return to normal brightness.
to reset the countdown timer to its previous start time.
to record up to 99 interval times (e.g. lap times)
Clock
51

Advertisement

Table of Contents
loading

Table of Contents