IBM 4685-L0D Setup, Operation, And Service Manual page 6

iv
IBM 4685-L0D Scanner: Setup, Operation, and Service Guide
Connecting and disconnecting the cable
Electric current from the power cords, telephone lines, and communication
cables may cause physical harm. When installing or moving the unit, opening
the cover of the unit, or connecting or disconnecting the unit, follow the proce-
dure on this page for connecting or disconnecting the cable.
To connect
Turn everything OFF.
Attach all cables to devices.
Attach the signal cables to
receptacles.
Attach the power cord to an outlet.
Turn the device ON.
During an electrical storm,
do not connect the cable.
To disconnect
Turn everything OFF.
Remove the power cord from the
outlet.
Remove the signal cables from
their receptacles.
Remove all cables from devices.
During an electrical storm,
do not disconnect the cable.