(Except For Models Of Area Code Ea Only); Direct Tuning - Sony HT-DDW8500 Operating Instructions Manual

Tuning into a station directly

(Direct Tuning)

Enter the frequency of a station directly by
using the numeric buttons.
1
Press TUNER repeatedly to
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2
Press D.TUNING.
3
Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
4
Press ENTER.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
62
GB
Changing the AM tuning scale
(Except for models of area code EA
only)
You can change the AM tuning scale to either
9 kHz or 10 kHz.
1
Press TUNER repeatedly to
select AM.
2
Press AMP MENU.
"1-LEVEL" appears on the display.
3
Press V/v repeatedly to select
"4-TUNER".
4
Press or b to enter the
menu.
5
Press V/v repeatedly to select
"AM STEP".
6
Press or b to enter the
parameter.
7
Press V/v repeatedly to select
the AM tuning scale you want.
Note
All AM preset stations will be erased when you
change the tuning scale.