JVC DLA-RS1 Instructions Manual page 30

DLA-RS1_EN.book Page 30 Wednesday, January 24, 2007 9:23 AM
Setting Menu (Continued)
Install.>High Altitude Mode
a
High Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On
Off
Func.>Back Color
b
Back Color
Configures the screen color displayed when there is no input signal.
Blue
Black
Func.>Sleep Timer
c
Sleep Timer
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
15
30
60
Off
Func.>D-ILA Logo
d
D-ILA Logo
Sets whether to display AD-ILA LogoB during startup.
On
Off
Func.>Lamp Power
e
Lamp Power
Configures the output of the light-source lamp.
Normal
High
Changing the lamp power will not change the lamp time (lamp life).
The setting cannot be changed within approximately 90 seconds after this unit has been turned on.
Settings cannot be changed within approximately 60 seconds after they are made.
Func.>Test Pattern
f
Test Pattern
Displays 6 types of test patterns.
This can also be displayed from the remote control. (pP12)
30
Downloaded from www.Manualslib.com
Settings
4
Activate.
Do not activate.
Sets screen color to ABlueB.
Sets screen color to ABlackB.
Switch to standby mode after 15 minutes.
Switch to standby mode after 30 minutes.
Switch to standby mode after 60 minutes.
Do not switch to standby mode.
Displays for 5 seconds.
Do not display.
For normal circumstances, select this setting. (170 W)
Select this when it is difficult to see the image in a bright room. (200 W)
manuals search engine